INTERFACIAL STRUCTURE AND DYNAMICS OF NEMATIC 4-n-PENTYL-4'-CYANOBIPHENYL LIQUID CRYSTALS ON SILVER, SILICA AND MODIFIED SILICA SUBSTRATES

• Main Author: Yoo, Heemin
• Other Authors: Pemberton, Jeanne E.
• Language: EN
• Published: The University of Arizona. 2009
• Subjects: 5CB; forced dewetting; Lifshitz theory; nematic liquid crystal; PM-IRRAS; SERS
• Online Access: http://hdl.handle.net/10150/195254

The process of forcibly dewetting a solid substrate from a bulk liquid so as to leave a thin residual layer on the surface is referred to as forced dewetting. This novel experimental approach helps to investigate interfacial species by minimizing the interference of the bulk liquid when coupled with spectroscopy. In this work, the scope of liquids investigating using this approach has been expanded from simple fluids to one type of complex fluid, a nematic liquid crystal, 4-n-pentyl-4'-cyanobiphenyl (5CB).In order to better understand the interfacial behavior of the simple fluids, water, chloroform, and n-pentane vapors were adsorbed onto omega-terminated SAM-modifed Ag (11-mercaptoundecanoic acid, 11-mercaptoundenanol, and undecanethiol) surfaces under vapor-saturated conditions. The kinetics of solvent adsorption on each of these surfaces were investigated and the thicknesses of the adsorbed layer were compared to predictions from Lifshitz theory of long-range van der Waals interactions. Although the predicted thicknesses do not match the experimental values for adsorbed films, the predicted thicknesses do match those observed experimentally using forced dewetting. The correlation between these predicted and observed thicknesses implies that residual film formation under the conditions of forced dewetting used in this laboratory is dictated by interfacial forces alone.The surface adsorption behavior of 5CB was investigated using surface-enhanced Raman spectroscopy with the aid of localized surface plasmon resonances-surface plasmon polaritron coupling. The results clearly indicate that 5CB is adsorbed to smooth Ag surface in a facial orientation with pi-d orbital interaction suggested.Finally, forced dewetting studies of bare, -NH2-temintaed SAM, and -CH3-temintaed SAM modified-SiO2 substrates from 5CB were undertaken. Residual layer thicknesses were monitored as a function of substrate velocity. The transition from the regime in which interfacial forces dictate residual layer thickness to the regime in which fluid dynamic forces dictate thickness was observed for the first time and was evaluated in terms of the average 5CB director orientation. Unlike simple fluids, 5CB has strong interfacial interactions from surface anchoring depending on the chemical nature of the substrate, which makes the residual layer thicknesses at least 100 times larger than observed in simple fluids.