EMI Noise Reduction Techniques for High Frequency Power Converters

EMI Noise Reduction Techniques for High Frequency Power Converters

Switch mode power supplies are widely used in different applications. High efficiency and high power density are two driving forces for power supply systems. However, high dv/dt and di/dt in switch mode power supplies will cause severe EMI noise issue. In a typical front-end converter, the EMI filte...

Full description

Bibliographic Details
Main Author:	Yang, Yuchen
Other Authors:	Electrical Engineering
Format:	Others
Published:	Virginia Tech 2018
Subjects:	Wide-band-gap devices high frequency EMI Magnetic integration
Online Access:	http://hdl.handle.net/10919/83372

Similar Items

Modular Approach for Characterizing and Modeling Conducted EMI Emissions in Power Converters
by: Liu, Qian
Published: (2014)

Radiated EMI from power converters
by: Arnautovski-Toševa Vesna, et al.
Published: (2005-01-01)

The diagnostic research of telecom power converter with electromagnetic interference (EMI) suppressing technology
by: Kchikach M., et al.
Published: (2008-04-01)

Conducted EMI Investigation of a SiC-Based Multiplexing Converter for EV/PHEV
by: Jianzhen Qu, et al.
Published: (2021-01-01)

Comparison of Two Design Methods of EMI Filter for High Voltage Power Supply in DC-DC Converter of Electric Vehicle
by: Li Zhai, et al.
Published: (2020-01-01)

Experimental analysis of phase shift modulation methods effects on EMI in dual active bridge DC-DC converter
by: Bingöl, O., et al.
Published: (2023)

Behavioral EMI-Models of Switched Power Converters
by: Bishnoi, Hemant
Published: (2013)

Characterization and Cancellation of High-Frequency Parasitics for EMI Filters and Noise Separators in Power Electronics Applications
by: Wang, Shuo
Published: (2014)

Modeling and Characterization of a PFC Converter in the Medium and High Frequency Ranges for Predicting the Conducted EMI
by: Yang, Liyu
Published: (2014)

Suppression of EMI radiation noise by inductor current recoil on boost PFC
by: Zhou Shen, et al.
Published: (2018-10-01)

Wide Band-Gap Semiconductor Based Power Converter Reliability and Topology Investigation
by: Ni, Ze
Published: (2021)

Conducted EMI Evaluation and Reduction in a Forward Switching Converter
by: Mohammad Rouhollah Yazdani, et al.
Published: (2012-04-01)

Practical Procedures in Determining the Differential Mode Characteristics of EMI Power Supply Filters
by: VADAN, I., et al.
Published: (2009-06-01)

Novel Frequency Swapping Technique for Conducted Electromagnetic Interference Suppression in Power Converter Applications
by: Ming-Tse Kuo, et al.
Published: (2016-12-01)

A Multi-Function Common Mode Choke Based on Active CM EMI Filters for AC/DC Power Converters
by: Liyu Dai, et al.
Published: (2019-01-01)

Conducted EMI Noise Prediction and Filter Design Optimization
by: Wang, Zijian
Published: (2016)

Comparison of Multi-Frequency and Multi-Coil Electromagnetic Induction (EMI) for Mapping Properties in Shallow Podsolic Soils
by: Daniel Altdorff, et al.
Published: (2020-04-01)

Transformer Shielding Technique for Common Mode Noise Reduction in Switch Mode Power Supplies
by: Yang, Yuchen
Published: (2014)

Integrated EMI Filters for Switch Mode Power Supplies
by: Chen, Rengang
Published: (2014)

EMI Terminal Behavioral Modeling of SiC-based Power Converters
by: Sun, Bingyao
Published: (2017)

Conducted EMI Prediction and Mitigation Strategy Based on Transfer Function for a High-Low Voltage DC-DC Converter in Electric Vehicle
by: Li Zhai, et al.
Published: (2018-04-01)

Integrated Frequency-Selective Conduction Transmission-Line EMI Filter
by: Liang, Yan
Published: (2014)

High Frequency Bi-directional DC/DC Converter with Integrated Magnetics for Battery Charger Application
by: Li, Bin
Published: (2020)

A Study of Integrated Signal and Power Transfer for Compact Isolated SiC MOSFET Gate-Drivers
by: Jorge Garcia, et al.
Published: (2021-01-01)

Electromagnetic Interference Mitigation in Switched Mode Power Converters Using Digital Sampling Techniques
by: HAMZA, DJILALI
Published: (2011)

Automatic EMI Filter Design for Power Electronic Converters Oriented to High Power Density
by: Graziella Giglia, et al.
Published: (2018-01-01)

High Frequency GaN Characterization and Design Considerations
by: Huang, Xiucheng
Published: (2016)

Non-Intrinsic Differential-Mode Noise in Switching Power Supplies and Its Implications to EMI Filter Design
by: Qu, Song
Published: (2011)

Thickness-dependent Magnetic and Microwave Resonance Characterization of Combined Stripe Patterned FeCoBSi Films
by: Li Zhang, et al.
Published: (2018-04-01)

Optimization of LLC Resonant Converters: State-trajectory Control and PCB based Magnetics
by: Fei, Chao
Published: (2018)

EMI Reduction in Discrete SMPS Using Programmable Gate Driver Output Resistance
by: Shorten, Andrew William
Published: (2011)

EMI Reduction in Discrete SMPS Using Programmable Gate Driver Output Resistance
by: Shorten, Andrew William
Published: (2011)

Integrated EMI/Thermal Design for Switching Power Supplies
by: Zhang, Wei
Published: (2014)

High Power Inverter EMI Characterization and Improvement by Auxiliary Resonant Snubber Inverter
by: Tang, Yuqing
Published: (2014)

EMI Reduction via Spread Spectrum in DC/DC Converters: State of the Art, Optimization, and Tradeoffs
by: Fabio Pareschi, et al.
Published: (2015-01-01)

MWCNT Coated Free-Standing Carbon Fiber Fabric for Enhanced Performance in EMI Shielding with a Higher Absolute EMI SE
by: Sudesh Jayashantha Pothupitiya Gamage, et al.
Published: (2017-11-01)

Integrated Magnetics and Magnetoelectrics for Sensing, Power, RF, and Microwave Electronics
by: Yifan He, et al.
Published: (2021-01-01)

High-Frequency Oriented Design of Gallium-Nitride (GaN) Based High Power Density Converters
by: Sun, Bingyao
Published: (2018)

A New EMI Modeling Method for Mixed-Mode Noise Analysis in Three-Phase Inverter System
by: Wu Zhou, et al.
Published: (2020-01-01)

Analysis of EMI in a Variable Frequency Drive through Modelling and Experimental Validation
by: Nisha P V, et al.
Published: (2019-06-01)