Mission-Integrated Synthesis/Design Optimization of Aerospace Subsystems under Transient Conditions
The equations governing the thermodynamic behavior of a military aircraft have been implemented by the Air Force Research Lab (AFRL) and other Integrated Vehicle Energy Technology Demonstration (INVENT) contributors into a cohesive, adaptable, dynamic aircraft simulation program in Mathworks' S...
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | en_US |
| Published: |
Virginia Tech
2017
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/10919/76855 http://scholar.lib.vt.edu/theses/available/etd-08222012-180039/ |
| Summary: | The equations governing the thermodynamic behavior of a military aircraft have been implemented by the Air Force Research Lab (AFRL) and other Integrated Vehicle Energy Technology Demonstration (INVENT) contributors into a cohesive, adaptable, dynamic aircraft simulation program in Mathworks' Simulink®. The resulting model known as the "Tip-to-tail" model meets the design specifications set forth by the INVENT program. The system consists of six intimately linked subsystems that include a propulsion subsystem (PS), air vehicle subsystem (AVS), robust electrical power subsystem (REPS), high power electric actuation subsystem (HPEAS), advanced power and thermal management subsystem (APTMS), and a fuel thermal management subsystem (FTMS). The model's governing equations are augmented with experimental data and supported by defined physical parameters.
In order to address the problems associated with the additional power and thermal loads for in more electric aircraft (MEA), this research utilizes exergy analysis and mission-integrated synthesis/design optimization to investigate the potential for improvement in tip-to-tail design/performance. Additionally, this thesis describes the development and integration of higher fidelity transient heat exchanger models for use in the tip-to-tail.
Finally, the change in performance due to the integration of new heat exchanger models developed here is presented. Additionally, this thesis discusses the results obtained by performing mission-integrated synthesis/design optimization on the tip-to-tail using heat exchanger design parameters as decision variables. These results show that the performance of the tip-to-thermal management subsystems improves significantly due to the integration of the heat exchanger models. These results also show improvements in vehicle performance due to the mission-integrated optimization. === Master of Science |
|---|