Interfacial debonding from a sandwiched elastomer layer
The problem of a thin elastomeric layer confined between two stiff adherends arises in numerous applications such as microelectronics, bio-inspired adhesion and the manufacture of soft biomedical products. A common requirement is that the debonding of the elastomeric layer from the adherends be con...
Main Author: | Mukherjee, Bikramjit |
---|---|
Other Authors: | Engineering Science and Mechanics |
Format: | Others |
Published: |
Virginia Tech
2016
|
Subjects: | |
Online Access: | http://hdl.handle.net/10919/71464 |
Similar Items
-
Comparison of Tungsten Carbide and Arkansas Stone For Adhesive Removal On Enamel Surface After Debonding Procedure
by: Aditya Kartika Noviyanti Putri, et al.
Published: (2018-03-01) -
A Moving Interface Finite Element Formulation to Predict Dynamic Edge Debonding in FRP-Strengthened Concrete Beams in Service Conditions
by: Marco Francesco Funari, et al.
Published: (2020-06-01) -
Dynamic behaviour of surface-bonded piezoelectric sensor with interfacial debonding
by: Huang, Hongbo
Published: (2009) -
Investigation of Mechanical Properties of Silicone/Phosphor Composite Used in Light Emitting Diodes Package
by: Yongjun Pan, et al.
Published: (2018-02-01) -
Effect of Adhesive Debonding on the Performance of Piezoelectric Sensors in Structural Health Monitoring Systems
by: Xuerong Liu, et al.
Published: (2019-11-01)