Control of Power Flow in Transmission Lines using Distributed Series Reactors

Distributed Series Reactors (DSRs) can be used to control power flow to more fully utilize the capacity of a transmission network, delaying investment in new transmission lines. In this study the IEEE 39 bus standard test system is modified to a 3-phase, unbalanced model consisting of 230 kV, 345 kV...

Full description

Bibliographic Details
Main Author: Nazir, Mohammad Nawaf
Other Authors: Electrical and Computer Engineering
Format: Others
Published: Virginia Tech 2015
Subjects:
Online Access:http://hdl.handle.net/10919/52978
Description
Summary:Distributed Series Reactors (DSRs) can be used to control power flow to more fully utilize the capacity of a transmission network, delaying investment in new transmission lines. In this study the IEEE 39 bus standard test system is modified to a 3-phase, unbalanced model consisting of 230 kV, 345 kV and 500 kV lines, where lines of different voltage run in parallel. This model is used to study load growth and the effect of adding DSRs to alleviate resulting overloads, and in particular to alleviate overloads on lines of different voltage running in parallel. The economic benefit of adding DSRs to the network is compared to the addition of new transmission lines in the network. In the second part of the work, the effect of unsymmetrical operation of DSRs on a single transmission line is studied and compared to the symmetrical operation of DSRs. It is found that the unsymmetrical operation of DSRs is more economical. Finally the unsymmetrical operation of DSRs to reduce voltage imbalance in the network is considered. === Master of Science