On the Control Aspects of Semiactive Suspensions for Automobile Applications
This analytical study evaluates the response characteristics of a two-degree-of freedom quarter-car model, using passive and semi-active dampers, along with a seven-degree-of-freedom full vehicle model. The behaviors of the semi-actively suspended vehicles have been evaluated using skyhook, groundh...
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Others |
| Published: |
Virginia Tech
2014
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/10919/33876 http://scholar.lib.vt.edu/theses/available/etd-07032003-150548/ |
| Summary: | This analytical study evaluates the response characteristics of a two-degree-of freedom quarter-car model, using passive and semi-active dampers, along with a seven-degree-of-freedom full vehicle model. The behaviors of the semi-actively suspended vehicles have been evaluated using skyhook, groundhook, and hybrid control policies, and compared to the behaviors of the passively-suspended vehicles. The relationship between vibration isolation, suspension deflection, and road-holding is studied for the quarter-car model. Three main performance indices are used as a measure of vibration isolation (which can be seen as a comfort index), suspension travel requirements, and road-holding quality. After performing numerical simulations on a seven-degree-of-freedom full vehicle model in order to confirm the general trends found for the quarter-car model, these three indices are minimized using optimization techniques.
The results of this study indicate that the hybrid control policy yields better comfort than a passive suspension, without reducing the road-holding quality or increasing the suspension displacement for typical passenger cars. The results also indicate that for typical passenger cars, the hybrid control policy results in a better compromise between comfort, road-holding and suspension travel requirements than the skyhook and groundhook control policies. Finally, the numerical simulations performed on a seven-degree-of-freedom full vehicle model indicate that the motion of the quarter-car model is not only a good approximation of the heave motion of a full-vehicle model, but also of the pitch and roll motions since both are very similar to the heave motion. === Master of Science |
|---|