Creation of Ovalbumin Based Scaffolds for Bone Tissue Regeneration

Bio-based materials are a viable alternative to synthetic materials for tissue engineering. Although many bio-based materials have been used, Ovalbumin (OA) has not yet been researched to create 3D structures that promote cellular responses. Micro-porous scaffolds are a promising construct for bon...

Full description

Bibliographic Details
Main Author: Farrar, Gabrielle
Other Authors: Materials Science and Engineering
Format: Others
Published: Virginia Tech 2014
Subjects:
Online Access:http://hdl.handle.net/10919/32273
http://scholar.lib.vt.edu/theses/available/etd-05062009-163857/
id ndltd-VTETD-oai-vtechworks.lib.vt.edu-10919-32273
record_format oai_dc
spelling ndltd-VTETD-oai-vtechworks.lib.vt.edu-10919-322732020-11-19T05:46:27Z Creation of Ovalbumin Based Scaffolds for Bone Tissue Regeneration Farrar, Gabrielle Materials Science and Engineering Morgan, Abby W. Gatenholm, Paul Barone, Justin R. Dowling, Norman E. tissue engineering porous scaffolds biomaterials ovalbumin Bio-based materials are a viable alternative to synthetic materials for tissue engineering. Although many bio-based materials have been used, Ovalbumin (OA) has not yet been researched to create 3D structures that promote cellular responses. Micro-porous scaffolds are a promising construct for bone tissue regeneration; therefore OA crosslinked with three different concentrations (10%, 15% and 20%) of glutaraldehyde (GA) was used in this research. After fabrication, a porous morphology was observed using SEM. Average pore sizes were found to be comparable to scaffolds previously shown to promote cellular response. A TNBS assay determined percent crosslinking in the scaffolds, however there was no significant difference in percent crosslinking despite differing GA concentrations used. Possible explanations include an excess of GA was used. Using DSC, a glass transition temperature (Tg) was found for control indicating the scaffolds are amorphous. Average dry and wet compressive strengths were also found. As expected, differing GA concentrations had no significant effect on Tg and average compressive strengths due to an excess used. Scaffolds were mechanically tested at 37°C with no significant difference found; therefore these scaffolds can be used in the body. It was shown through cell studies that MC3T3-E1 pre-osteoblast cells significantly increased in number on the 10% and 15% scaffolds, therefore cell proliferation occurred. Because of a positive cellular response, 10% GA scaffolds were used for differentiation studies that showed an increase in osteocalcin at 21 days and alkaline phosphatase levels for scaffolds cultured for 14 days. Overall OA scaffolds have shown to be a promising 3D construct for bone tissue regeneration. Master of Science 2014-03-14T20:35:21Z 2014-03-14T20:35:21Z 2009-04-24 2009-05-06 2009-06-02 2009-06-02 Thesis etd-05062009-163857 http://hdl.handle.net/10919/32273 http://scholar.lib.vt.edu/theses/available/etd-05062009-163857/ G_FARRAR_THESIS.pdf In Copyright http://rightsstatements.org/vocab/InC/1.0/ application/pdf Virginia Tech
collection NDLTD
format Others
sources NDLTD
topic tissue engineering
porous scaffolds
biomaterials
ovalbumin
spellingShingle tissue engineering
porous scaffolds
biomaterials
ovalbumin
Farrar, Gabrielle
Creation of Ovalbumin Based Scaffolds for Bone Tissue Regeneration
description Bio-based materials are a viable alternative to synthetic materials for tissue engineering. Although many bio-based materials have been used, Ovalbumin (OA) has not yet been researched to create 3D structures that promote cellular responses. Micro-porous scaffolds are a promising construct for bone tissue regeneration; therefore OA crosslinked with three different concentrations (10%, 15% and 20%) of glutaraldehyde (GA) was used in this research. After fabrication, a porous morphology was observed using SEM. Average pore sizes were found to be comparable to scaffolds previously shown to promote cellular response. A TNBS assay determined percent crosslinking in the scaffolds, however there was no significant difference in percent crosslinking despite differing GA concentrations used. Possible explanations include an excess of GA was used. Using DSC, a glass transition temperature (Tg) was found for control indicating the scaffolds are amorphous. Average dry and wet compressive strengths were also found. As expected, differing GA concentrations had no significant effect on Tg and average compressive strengths due to an excess used. Scaffolds were mechanically tested at 37°C with no significant difference found; therefore these scaffolds can be used in the body. It was shown through cell studies that MC3T3-E1 pre-osteoblast cells significantly increased in number on the 10% and 15% scaffolds, therefore cell proliferation occurred. Because of a positive cellular response, 10% GA scaffolds were used for differentiation studies that showed an increase in osteocalcin at 21 days and alkaline phosphatase levels for scaffolds cultured for 14 days. Overall OA scaffolds have shown to be a promising 3D construct for bone tissue regeneration. === Master of Science
author2 Materials Science and Engineering
author_facet Materials Science and Engineering
Farrar, Gabrielle
author Farrar, Gabrielle
author_sort Farrar, Gabrielle
title Creation of Ovalbumin Based Scaffolds for Bone Tissue Regeneration
title_short Creation of Ovalbumin Based Scaffolds for Bone Tissue Regeneration
title_full Creation of Ovalbumin Based Scaffolds for Bone Tissue Regeneration
title_fullStr Creation of Ovalbumin Based Scaffolds for Bone Tissue Regeneration
title_full_unstemmed Creation of Ovalbumin Based Scaffolds for Bone Tissue Regeneration
title_sort creation of ovalbumin based scaffolds for bone tissue regeneration
publisher Virginia Tech
publishDate 2014
url http://hdl.handle.net/10919/32273
http://scholar.lib.vt.edu/theses/available/etd-05062009-163857/
work_keys_str_mv AT farrargabrielle creationofovalbuminbasedscaffoldsforbonetissueregeneration
_version_ 1719357993440509952