Winding and curing stress analysis of filament wound composites by finite elements

Winding and curing stress analysis of filament wound composites by finite elements

M.S.

Bibliographic Details
Main Author:	Johnson, John Christopher
Other Authors:	Mechanical Engineering
Format:	Others
Language:	en
Published:	Virginia Polytechnic Institute and State University 2021
Subjects:	LD5655.V855 1986.J636 Fibrous composites > Analysis Fibrous composites > Fatigue Finite element method
Online Access:	http://hdl.handle.net/10919/106107

Similar Items

A finite element cure model and cure cycle optimization for composite structures
by: Somanath, Nagendra
Published: (2014)

A layer tension loss and cure model for filament wound composites
by: Lombardi, Vincent T.
Published: (2014)

Finite element modeling of the filament winding process using ABAQUS
by: Miltenberger, Louis C.
Published: (2014)

Parameter establishment and verification of a fabrication stress model and a thermo-kinetic cure model for filament wound structures
by: Call, Russell Kent
Published: (2014)

Modelling of the filament-winding fabrication process
by: Stein, S. C.
Published: (2014)

Matrix-fiber stress transfer in composite materials elasto-plastic model with an interphase layer
by: Lhotellier, Frederic C.
Published: (2014)

An analytical model of strength loss in filament wound spherical vessels
by: Leavesley, Peter Joseph
Published: (2021)

Environmental effects on stitched RTM composites
by: Furrow, Keith W.
Published: (2014)

The compressive failure of graphite/epoxy plates with circular holes
by: Knauss, James F.
Published: (2016)

Thermal analysis of the continuous filament winding process
by: James, Darryl L.
Published: (2007)

Dynamic mechanical analysis of graphite/epoxy composites with varied interphases
by: Elmore, Jennifer Susan
Published: (2014)

On-line consolidation of thermoplastic towpreg composites in filament winding
by: Wagner, Philip Cameron
Published: (2007)

Development and use of an improved filament-winding process model
by: Kokan, David R.
Published: (2006)

Fiber tension loss during the winding and cure of a filament wound composite case
by: Northrop, Paul M.
Published: (2014)

Feasibility of fiber reinforced composite materials used in highway bridge superstructures
by: Lin, Shih-Yung
Published: (2014)

An investigation into the manufacturing of complex, three-dimensional components using continuous fibre reinforced thermoplastic composites
by: Mashau, Shivasi Christopher
Published: (2018)

The development and evaluation of an alternative powder prepregging technique for use with larc-tpi/graphite composites
by: Ogden, Andrea L.
Published: (2014)

New in-plane and interlaminar shear test methods for fiber reinforced composites
by: Ifju, Peter G.
Published: (2014)

A model of the winding and curing processes for filament wound composites
by: Tzeng, Jerome T. S.
Published: (2017)

Micromechanics of crenulated fibers in carbon/carbon composites
by: Carapella, Elissa E.
Published: (2014)

On iso- and nonisothermal crack problems of a layered anisotropic elastic medium
by: Choi, Hyung Jip
Published: (2015)

Experimental setup and testing of fiber reinforced composite structures
by: Bumpus, Scott Robert John.
Published: (2008)

Investigation of progressive damage and failure in IM7 carbon fiber/5250-4 bismaleimide resin matrix composite laminates
by: Etheridge, George Alexander
Published: (2008)

Radiation and temperature effects on the time-dependent response of T300/934 graphite/epoxy
by: Yancey, Robert Neil
Published: (2014)

Behavior of continuous filament advanced composite isogrid structure
by: Reddy, Ambur Damodara
Published: (2006)

Mechanical properties of bio-absorbable materials
by: Ajwani, Anita
Published: (2014)

Vibrations of an isolated wind turbine blade using the finite element method
by: Flood, Robert C.
Published: (2019)

Analytical modeling of hybrid composite beams
by: Bhutta, Salman Ahmed
Published: (2014)

Compression and buckling of composite panels with curvilinear fibers
by: Olmedo, Reynaldo A.
Published: (2014)

Effect of processing induced defects on the failure characteristics of graphite epoxy angles
by: Mobuchon, Alain
Published: (2015)

Stiffness reduction resulting from transverse cracking in fiber- reinforced composite laminates
by: Highsmith, Alton L.
Published: (2016)

Finite element micromechanics modeling of inelastic deformation of unidirectionally fiber-reinforced composites
by: Hsu, Su-Yuen
Published: (2014)

Finite element analysis of damaged cross-ply composite laminates
by: Strauss, Elizabeth Ann
Published: (2015)

The creep and creep rupture of SMC-R50 under different thermomechanical conditions
by: Yen, Shing-Chung
Published: (2017)

Fiber fracture in continuous-fiber reinforced composite materials during cyclic loading
by: Razvan, Ahmad
Published: (2014)

The role of surface pretreatment and surface analysis in the bondability of carbon fiber-polyimide matrix composites
by: Moyer, Denise Joy DeGeorge
Published: (2015)

An investigation of the excitation frequency dependent behavior of fiber reinforced epoxy composites during vibrothermographic inspection
by: Russell, Samuel Stephen
Published: (2017)

Critical evaluation of strong organic fibers vis-a-vis mechanical performance in flexible structures
by: Chang, Sheau-Miin
Published: (2006)

Modeling of fiber reinforced composites incorporating distinct interface properties
by: Veazie, David R.
Published: (2007)

Methodologies for the optimal design of fibre-reinforced composite structures
by: Smith, Ryan Elliot
Published: (2017)