Circuit techniques for the rejection of LO harmonics within CMOS Mixers
The availability of low-cost wireless devices has enabled wide-scale connectivity over recent years. Today’s wireless devices provide services including voice communication, GPS location, and internet connectivity. With a larger number of supported wireless standards within a single device, new wire...
Main Author: | |
---|---|
Format: | Others |
Language: | English |
Published: |
2012
|
Subjects: | |
Online Access: | http://hdl.handle.net/2152/ETD-UT-2012-05-5542 |
id |
ndltd-UTEXAS-oai-repositories.lib.utexas.edu-2152-ETD-UT-2012-05-5542 |
---|---|
record_format |
oai_dc |
spelling |
ndltd-UTEXAS-oai-repositories.lib.utexas.edu-2152-ETD-UT-2012-05-55422015-09-20T17:08:44ZCircuit techniques for the rejection of LO harmonics within CMOS MixersForbes, Travis Michael, 1986-Harmonic rejection mixerMixerRFLo synthesisFrequency synthesisBroadband receiverThe availability of low-cost wireless devices has enabled wide-scale connectivity over recent years. Today’s wireless devices provide services including voice communication, GPS location, and internet connectivity. With a larger number of supported wireless standards within a single device, new wireless radio techniques are required in order to implement flexible and programmable broadband receivers to replace the standard specific receivers often seen today. The continual growth in the use of the wireless spectrum has led to an increasingly hostile interference environment for such receivers. While interferers may be located out of the signal band of interest, they may still reside within the large band of operation of the broadband receiver, making removal of the interference by filtering difficult. The requirement for small form-factor and cost minimization has made an increased level of integration highly desirable to minimize the number of external filter components required to reject interferers. A key consideration in the design of broadband receivers is the spurious response of the downconversion mixers, where local oscillator (LO) harmonics can lead to downconversion of unfiltered interferers to baseband, along with the desired signal, thus degrading the signal-to-noise ratio. Recent broadband receivers utilize a harmonic rejection mixer to reject LO harmonics within the downconversion mixer and prevent interferers from being downconverted to baseband. This report details the cause of harmonic mixing within CMOS mixers and provides a survey of published circuit techniques robust to device mismatch to remove LO harmonic response. A description of frequency translation and the effect of harmonic mixing on the translation is presented. The theoretical background of the operation of harmonic rejection mixers is described, including the effect of gain and phase errors on the achievable level of harmonic rejection. An overview of published harmonic rejection mixer techniques including the first harmonic rejection mixer and techniques to limit the effects of phase and gain mismatch on harmonic rejection is discussed. The report concludes with the introduction of a novel method for effective synthesis of multiple downconversion local oscillator frequencies within a harmonic rejection mixer. The proposed method reduces the tuning range required of the downconversion oscillator in broadband applications. Based on Monte Carlo simulations, while considering device mismatches over a 3σ spread, harmonic rejection better than 63 dB is observed for all selectable LO frequencies.text2012-08-13T14:14:06Z2012-08-13T14:14:06Z2012-052012-08-13May 20122012-08-13T14:14:13Zthesisapplication/pdfhttp://hdl.handle.net/2152/ETD-UT-2012-05-55422152/ETD-UT-2012-05-5542eng |
collection |
NDLTD |
language |
English |
format |
Others
|
sources |
NDLTD |
topic |
Harmonic rejection mixer Mixer RF Lo synthesis Frequency synthesis Broadband receiver |
spellingShingle |
Harmonic rejection mixer Mixer RF Lo synthesis Frequency synthesis Broadband receiver Forbes, Travis Michael, 1986- Circuit techniques for the rejection of LO harmonics within CMOS Mixers |
description |
The availability of low-cost wireless devices has enabled wide-scale connectivity over recent years. Today’s wireless devices provide services including voice communication, GPS location, and internet connectivity. With a larger number of supported wireless standards within a single device, new wireless radio techniques are required in order to implement flexible and programmable broadband receivers to replace the standard specific receivers often seen today.
The continual growth in the use of the wireless spectrum has led to an increasingly hostile interference environment for such receivers. While interferers may be located out of the signal band of interest, they may still reside within the large band of operation of the broadband receiver, making removal of the interference by filtering difficult. The requirement for small form-factor
and cost minimization has made an increased level of integration highly desirable to minimize the number of external filter components required to reject interferers.
A key consideration in the design of broadband receivers is the spurious response of the downconversion mixers, where local oscillator (LO) harmonics can lead to downconversion of unfiltered interferers to baseband, along with
the desired signal, thus degrading the signal-to-noise ratio. Recent broadband receivers utilize a harmonic rejection mixer to reject LO harmonics within the downconversion mixer and prevent interferers from being downconverted to baseband.
This report details the cause of harmonic mixing within CMOS mixers and provides a survey of published circuit techniques robust to device mismatch to remove LO harmonic response. A description of frequency translation and the effect of harmonic mixing on the translation is presented. The theoretical background of the operation of harmonic rejection mixers is described, including the effect of gain and phase errors on the achievable level of harmonic rejection. An overview of published harmonic rejection mixer techniques including the first harmonic rejection mixer and techniques to limit the effects of phase and gain mismatch on harmonic rejection is discussed.
The report concludes with the introduction of a novel method for effective synthesis of multiple downconversion local oscillator frequencies within a harmonic rejection mixer. The proposed method reduces the tuning range
required of the downconversion oscillator in broadband applications. Based on Monte Carlo simulations, while considering device mismatches over a 3σ spread, harmonic rejection better than 63 dB is observed for all selectable LO frequencies. === text |
author |
Forbes, Travis Michael, 1986- |
author_facet |
Forbes, Travis Michael, 1986- |
author_sort |
Forbes, Travis Michael, 1986- |
title |
Circuit techniques for the rejection of LO harmonics within CMOS Mixers |
title_short |
Circuit techniques for the rejection of LO harmonics within CMOS Mixers |
title_full |
Circuit techniques for the rejection of LO harmonics within CMOS Mixers |
title_fullStr |
Circuit techniques for the rejection of LO harmonics within CMOS Mixers |
title_full_unstemmed |
Circuit techniques for the rejection of LO harmonics within CMOS Mixers |
title_sort |
circuit techniques for the rejection of lo harmonics within cmos mixers |
publishDate |
2012 |
url |
http://hdl.handle.net/2152/ETD-UT-2012-05-5542 |
work_keys_str_mv |
AT forbestravismichael1986 circuittechniquesfortherejectionofloharmonicswithincmosmixers |
_version_ |
1716822840385208320 |