Fractional frequency reuse for multi-tier cellular networks

• Main Author: Novlan, Thomas David
• Format: Others
• Language: English
• Published: 2012
• Subjects: Fractional frequency reuse; Stochastic geometry; Heterogeneous cellular networks
• Online Access: http://hdl.handle.net/2152/ETD-UT-2012-05-5184

Modern cellular systems feature increasingly dense base station deployments, augmented by multiple tiers of access points, in an effort to provide higher network capacity as user traffic, especially data traffic, increases. The primary limitation of these dense networks is co-channel interference. The primary source of interference is inter-cell and cross-tier interference, which is especially limiting for users near the boundary of the cells. Inter-cell interference coordination (ICIC) is a broad umbrella term for strategies to improve the performance of the network by having each cell allocate its resources such that the interference experienced in the network is minimized, while maximizing spatial reuse. Fractional frequency reuse (FFR) has been proposed as an ICIC technique in modern wireless networks. The basic idea of FFR is to partition the cell’s bandwidth so that (i) cell-edge users of adjacent cells do not interfere with each other and (ii) interference received by (and created by) cell-interior users is reduced, while (iii) improving spectral reuse compared to conventional frequency reuse. It is attractive for its intuitive implementation and relatively low network coordination requirements compared to other ICIC strategies including interference cancellation, network MIMO, and opportunistic scheduling. There are two common FFR deployment modes: Strict FFR and Soft Frequency Reuse (SFR). This dissertation identifies and addresses key technical challenges associated with fractional frequency reuse in modern cellular networks by utilizing an accurate yet tractable model of both the downlink (base station to mobile) and uplink (mobile to base station) based on the Poisson point process for modeling base station locations. The resulting expressions allow for the development of system design guidelines as a function of FFR parameters and show their impact on important metrics of coverage, rate, power control, and spectral efficiency. This new complete analytical framework addresses system design and performance differences in the uplink and downlink. Also, this model can be applied to cellular networks with multiple tiers of access points, often called heterogeneous cellular networks. The model allows for analysis as a function of system design parameters for users under Strict FFR and SFR with closed and open access between tiers. === text