Repetitive Operation of the University of Saskatchewan Compact Torus Injector
Development of fueling technologies for modern and future tokamak reactors is essential for their implementation in a commercial energy production setting. Compared to the presently available fueling technologies, gas or cryogenic pellet injection, compact torus injection presents an effective and e...
Main Author: | |
---|---|
Other Authors: | |
Format: | Others |
Language: | en |
Published: |
University of Saskatchewan
2009
|
Subjects: | |
Online Access: | http://library.usask.ca/theses/available/etd-07312009-165820/ |
id |
ndltd-USASK-oai-usask.ca-etd-07312009-165820 |
---|---|
record_format |
oai_dc |
spelling |
ndltd-USASK-oai-usask.ca-etd-07312009-1658202013-01-08T16:34:00Z Repetitive Operation of the University of Saskatchewan Compact Torus Injector Pant, Andre nuclear fusion compact torus spheromak tokamak fueling Development of fueling technologies for modern and future tokamak reactors is essential for their implementation in a commercial energy production setting. Compared to the presently available fueling technologies, gas or cryogenic pellet injection, compact torus injection presents an effective and efficient method for directly fueling the central core of tokamak plasmas. Fueling of the central core of a tokamak plasma is pivotal for providing efficient energy production. The central core plasma of a reactor contains the greatest density of fusion processes. For consistent and continuous fueling of tokamak fusion reactors, compact torus injectors must be operated in a repetitive mode.<p> The goal of this thesis was to study the feasibility of firing the University of Saskatchewan Compact Torus Injector (USCTI) in a repetitive mode. In order to enable USCTI to fire repetitively, modifications were made to its electrical system, control system and data acquisition system. These consisted primarily of the addition of new power supplies, to enable fast charging of the many capacitor banks used to form and accelerate the plasma. The maximum firing rate achieved on USCTI was 0.33 Hz, an increase from the previous maximum firing rate of 0.2 Hz achieved at UC Davis.<p> Firing USCTI in repetitive modes has been successful. It has been shown that the CTs produced in any given repetitive series are properly formed and repeatable. This is made evident through analysis of data collected from the CTs' magnetic fields and densities as they traveled along the injector barrel. The shots from each experiment were compared to the series' mean data and were shown to be consistent over time. Calculations of their correlations show that there are only minimal deviations from shot to shot in any given series. Bradley, Michael Moewes, Alexander Kasap, Safa Xiao, Chijin Degenstein, Doug University of Saskatchewan 2009-08-06 text application/pdf http://library.usask.ca/theses/available/etd-07312009-165820/ http://library.usask.ca/theses/available/etd-07312009-165820/ en unrestricted I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
collection |
NDLTD |
language |
en |
format |
Others
|
sources |
NDLTD |
topic |
nuclear fusion compact torus spheromak tokamak fueling |
spellingShingle |
nuclear fusion compact torus spheromak tokamak fueling Pant, Andre Repetitive Operation of the University of Saskatchewan Compact Torus Injector |
description |
Development of fueling technologies for modern and future tokamak reactors is essential for their implementation in a commercial energy production setting. Compared to the presently available fueling technologies, gas or cryogenic pellet injection, compact torus injection presents an effective and efficient method for directly fueling the central core of tokamak plasmas. Fueling of the central core of a tokamak plasma is pivotal for providing efficient energy production. The central core plasma of a reactor contains the greatest density of fusion processes. For consistent and continuous fueling of tokamak fusion reactors, compact torus injectors must be operated in a repetitive mode.<p>
The goal of this thesis was to study the feasibility of firing the University of Saskatchewan Compact Torus Injector (USCTI) in a repetitive mode. In order to enable USCTI to fire repetitively, modifications were made to its electrical system, control system and data acquisition system. These consisted primarily of the addition of new power supplies, to enable fast charging of the many capacitor banks used to form and accelerate the plasma. The maximum firing rate achieved on USCTI was 0.33 Hz, an increase from the previous maximum firing rate of 0.2 Hz achieved at UC Davis.<p>
Firing USCTI in repetitive modes has been successful. It has been shown that the CTs produced in any given repetitive series are properly formed and repeatable. This is made evident through analysis of data collected from the CTs' magnetic fields and densities as they traveled along the injector barrel. The shots from each experiment were compared to the series' mean data and were shown to be consistent over time. Calculations of their correlations show that there are only minimal deviations from shot to shot in any given series.
|
author2 |
Bradley, Michael |
author_facet |
Bradley, Michael Pant, Andre |
author |
Pant, Andre |
author_sort |
Pant, Andre |
title |
Repetitive Operation of the University of Saskatchewan Compact Torus Injector |
title_short |
Repetitive Operation of the University of Saskatchewan Compact Torus Injector |
title_full |
Repetitive Operation of the University of Saskatchewan Compact Torus Injector |
title_fullStr |
Repetitive Operation of the University of Saskatchewan Compact Torus Injector |
title_full_unstemmed |
Repetitive Operation of the University of Saskatchewan Compact Torus Injector |
title_sort |
repetitive operation of the university of saskatchewan compact torus injector |
publisher |
University of Saskatchewan |
publishDate |
2009 |
url |
http://library.usask.ca/theses/available/etd-07312009-165820/ |
work_keys_str_mv |
AT pantandre repetitiveoperationoftheuniversityofsaskatchewancompacttorusinjector |
_version_ |
1716532451235332096 |