An Experimental Investigation of End Plate Connections

An Experimental Investigation of End Plate Connections

The results of an experimental investigation of end plate connections of various thicknesses welded to 10 WF21 and 12 WF27 beams and connected to various stiffened and unstiffened 8 WF columns are reported. Moment-rotation curves have been obtained for all connections tested and these have been comp...

Full description

Bibliographic Details
Published:	2015
Subjects:	engineering welding experimental investigation civil engineering
Online Access:	http://hdl.handle.net/10388/6816

Similar Items

Experimental and Simplified Analytical Investigation of Full Scale Sandwich Panel Walls
by: Al-Rubaye, Salam Adil
Published: (2017)

Experimental study on the performance of slant end-plate connections at elevated temperature
by: Zahmatkesh, F., et al.
Published: (2018)

Strain capacity analysis of the mismatched welding joint with misalignments of D 1,422 mm X80 steel pipelines: An experimental and numerical investigation
by: Yue Yang, et al.
Published: (2021-06-01)

An Experimental Study of the Influence of Eccentricity on Shear Lag Effects in Welded Connections
by: Orloff, Kenneth L.
Published: (2017)

A RESEARCH ON MARINE DIESEL ENGINE SPEED CONTROLLER BY FUZZY LOGIC CONTROL THEORY BASED ON EXPERIMENTAL INVESTIGATION
by: Tien Anh Tran, et al.
Published: (2019-03-01)

Analytical study of end-plate connection on cruciform column section
by: Tan, Boon Cheik, et al.
Published: (2015)

Predicting the behaviour of extended end plate connections using strain gauges
by: Mohd Mahir, Fatimatuzahrah
Published: (2009)

Standardisation of partial strength connections of extended end-plate connections for trapezoid web profiled steel sections
by: Md. Tahir, Mahmood, et al.
Published: (2008)

Experimental Investigation on the Performance of a Compressed-Air Driven Piston Engine
by: Chih-Jie Yu, et al.
Published: (2013-03-01)

Thermal performance of axially restrained steel beams with slant end-plate connections
by: Zahmatkesh, Farshad
Published: (2015)

Structural behaviour of end-plate connections on hybrid beam to cruciform column section
by: Tan, Boon Cheik
Published: (2020)

Finite element analysis on flush end plate connection using LUSAS software
by: Mohd. Yusoff, Che Som
Published: (2006)

Parametric study of blind bolted end-plate connection on structural square hollow section
by: Seah, Ivy
Published: (2014)

Experimental testing of reinforced end-notched glulam beams
by: Todorović Marija, et al.
Published: (2018-01-01)

Analytical and numerical modeling of flush end-plate connection system with built-up hybrid beam
by: Mohamed Omer, Joma Hamed
Published: (2013)

Experimental Investigation of Tensile Test on Connection of Cold-formed Cut-curved Steel Section
by: Abdul Rahman, N.F, et al.
Published: (2017)

Analytical and experimental investigation on slip-in gusset plate connection for double c-channel sections of cold-formed steel
by: Aminuddin, Kiagus, et al.
Published: (2020)

Non-linear analysis of a symmetric flush end plate bolted beam-to-column steel connection
by: Ahmad, Che Husni
Published: (2005)

Glulam-concrete composites: experimental investigation into the connection system
by: José Luiz Miotto, et al.
Published: (2011-03-01)

Experimental Investigations Performance for (VCC) Using 2-Way (PFCV) Type (2FRE)
by: Majid Ahmed Oleiwi
Published: (2017-12-01)

Evaluation of Redundancy of Twin Steel Box-Girder Bridges
by: Pham, Huy V
Published: (2016)

Experimental investigation of Lamb waves in transversely isotropic composite plates
by: Orwat, Mark E. (Mark Edwin), 1969-
Published: (2014)

Analytical investigation and the design of the compressive strength of steel gusset plate connections
by: Sheng, Ni
Published: (1998)

Experimental investigation of the braking process of automobiles
by: Edgar Sokolovskij
Published: (2005-06-01)

Experimental investigation of the braking process of automobiles
by: E. Sokolovskij
Published: (2005-06-01)

A Finite Element Investigation of Non-Orthogonal Moment Connections in Steel Construction
by: Wilson, Kevin E.
Published: (2015)

An Experimental Investigation into Combustion Fitting in a Direct Injection Marine Diesel Engine
by: Yu Ding, et al.
Published: (2018-12-01)

An experimental investigation of "end-block" reinforcing in prestressed concrete beams
by: Tsavalas, George John
Published: (2010)

Correlation of Weldment Hardness Profiles in Steels with Jominy End-Quench Data
by: Panjabi, Deepak
Published: (1967)

Experimental Investigation and Simulation of High Performance Surface Coating in Steel Bolted Slip-Critical Connections
by: Shang, Haodi
Published: (2017)

Post-punching response of flat plate slab-column connections
by: Redl, Erin
Published: (2009)

Analysis of corrugated web beam to column extended end plate connection using LUSAS software
by: Alisibramulisi, Anizahyati
Published: (2006)

THE INVESTIGATION OF A BUTT WELD WITH ULTRASOUND
by: Claudiu BABIS, et al.
Published: (2018-12-01)

INVESTIGATION OF A FILLET WELF JOINT WITH ULTRASOUND
by: Claudiu BABIS, et al.
Published: (2018-12-01)

Experimental Investigations of Vortex Induced Vibration of A Flat Plate in Pitch Oscillation
by: Yang, Yi
Published: (2012)

Experimental and Computational Investigation of Temper Bead Welding and Dissimilar Metal Welding for Nuclear Structures Repair
by: Zhang, kaiwen
Published: (2016)

Experimental Study of Free-Convection from Rectangular Fins Array on a Heated Horizontal Plate with Notch Effects
by: Saad Najeeb Shehab
Published: (2017-01-01)

An Experimental Investigation of the Relation Between the Cooling Rate and Welding Variables in Fusion Welding
by: Biswas, Sujit
Published: (1972)

Reexamination of Shear Lag in HSS Tension Members; Side Gusset Plate Connections
by: Bhat, Akashdeep
Published: (2018)

Analytical Investigation of Welded Gusset Plates Exhibiting Section Loss
by: El-Dabaja, Sarah S.
Published: (2014)