High Performance Steel for Percussive Drilling

High Performance Steel for Percussive Drilling

Show other versions (2)

Atlas Copco Secoroc AB are searching after new bulk materials for drill heads that are used in percussive drilling in order to improve their strength and durability. The aim of this project is to assist Atlas Copco in this search and provide them with further information regarding material propertie...

Full description

Bibliographic Details
Main Authors:	Åkerlund, Elin, Jonsson Åberg, Jakob, Österberg, Patrik, Havo, Rebecka, Fredriksson, Mikael
Format:	Others
Language:	English
Published:	Uppsala universitet, Institutionen för teknikvetenskaper 2017
Subjects:	Bulk material drill head UTS KIC maraging steel high alloy secondary hardened steel low alloy steel Materials Chemistry Materialkemi
Online Access:	http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-323808

Similar Items

High Performance Steel for Percussive Drilling
by: Åkerlund, Elin, et al.
Published: (2017)

High Performance Steel for Percussive Drilling
by: Fredriksson, Mikael, et al.
Published: (2017)

Ion-Nitriding Of Maraging Steel (MDN 250A Grade) For Light Combat Aircraft Applications
by: Shetty, Kishora
Published: (2009)

Corrosion fatigue of engineering alloys in aqueous environments
by: Harty, Brian Dudley
Published: (2016)

Rheocasting in low alloy steel
by: Bye, Richard Lister
Published: (2005)

Contribuicao ao estudo da cinetica do envelhecimento de acos 'maraging'
by: VICTOR, OLAVO B. dos S.
Published: (1990)

Contribuicao ao estudo da cinetica do envelhecimento de acos 'maraging'
by: VICTOR, OLAVO B. dos S.
Published: (1990)

Development of Minimally Alloyed Structural Steel for Large Module Gears of Transmissions
by: Sergei P. Rudenko, et al.
Published: (2020-12-01)

Influence of the Annealing on the Wear Resistance of Gas-Thermal Coatings from Ni-Cr-Al Pseudoalloy
by: Evgeniy V. Astrashab, et al.
Published: (2020-12-01)

Mechanical and Corrosion Properties of Selective Laser Melted Alloys
by: Suryawanshi, Jyoti Balaji
Published: (2018)

Mechanical and functional properties of Cr-(Ni)-Mn-N austenitic heat-resistant steels
by: Shypytsyn S.Ya., et al.
Published: (2019-09-01)

Surface Modification of Superaustenitic and Maraging Stainless Steels by Low-Temperature Gas-Phase Carburization
by: Gentil, Johannes Axel
Published: (2008)

The influence of water composition on the pitting behaviour of newly developed corrosion resistant steels
by: Cotterrell, M H
Published: (2016)

Microstructure and deformation behavior of a novel steel rebar: Effect of the heterogeneous microstructure of soft ferrite and Hard bainite
by: Dan Song, et al.
Published: (2020-11-01)

The influence of chemical composition on the dimensions
by: Łyduch Konrad, et al.
Published: (2018-06-01)

The Effects of Rust on the Gas Carburization of AISI 8620 Steel
by: Wang, Xiaolan
Published: (2008)

Experimental Investigation and Optimizing Geometrical Characteristics and Surface Quality in Drilling of AISI H13 Steel
by: Farshid Jafarian, et al.
Published: (2020-04-01)

Combined mode I - mode III fracture toughness of a high-strength low-alloy steel /
by: Schroth, James Gregory
Published: (1985)

Dissolution of high melting point additions in liquid steel
by: Argyropoulos, Stavros A.
Published: (1981)

THE ABILITY TO CLINCHING AS A FUNCTION OF MATERIAL HARDENING BEHAVIOR
by: Tadeusz Balawender
Published: (2018-04-01)

The synergistic effect of niobium and boron on recrystallization in hot worked austentite /
by: Mavropoulos, L. T.
Published: (1986)

Microstructural Studies on High Cr-Mo Secondary Hardening Ultra-High Strength Steels
by: Veerababu, R
Published: (2018)

The Phase Transformations in Hypoeutectoid Steels Mn-Cr-Ni
by: RoŻniata E., et al.
Published: (2015-04-01)

Effect of Alloying Additives and Microadditives on Hardenability Increase Caused by Action of Boron
by: Beata Białobrzeska
Published: (2021-04-01)

Diffusion Bonding of High-Alloyed Tool Steels with Maraging and Precipitation Hardening Steels
by: Michael Göbl, et al.
Published: (2020-12-01)

Static softening in multiply microalloyed steels
by: Floros, Theodoros Vasilios.
Published: (1984)

A study of light alloy addition techniques in steelmaking /
by: Mucciardi, Frank A.
Published: (1980)

A study of the effect of copper concentration and heat treatment on the structure and hardness of CD-4MCu stainless steel /
by: Martin, Samuel Albert
Published: (1971)

Aqueous modelling of aluminum wire injection procedures in steelmaking
by: Külünk, Bahadir.
Published: (1986)

Optimization of alloy additions to achieve steel product properties at minimum cost
by: Faoro, Anthony Angelo
Published: (1980)

The metallurgical phase transformations in ROQ-tuf AD690 due to the MMA welding process
by: Daames, Sherwyn
Published: (2012)

Numerical modeling of induction hardening of gear wheels made of steel AMS 6419
by: J. Barglik, et al.
Published: (2019-01-01)

On the Superplastic Deformation in Vanadium-Alloyed High-Nitrogen Steel
by: Elena Astafurova, et al.
Published: (2019-12-01)

Quantitative characterization of void nucleation and growth in HY-100 steels
by: Mukherjee, Sunit
Published: (2008)

Correlation of fractography, microstructure and fracture toughness behavior of high strength alloys.
by: Van Den Avyle, James Albert
Published: (2011)

A New Maraging Stainless Steel with Excellent Strength–Toughness–Corrosion Synergy
by: Jialong Tian, et al.
Published: (2017-11-01)

The dissolution of niobium and zirconium in liquid steel
by: Sismanis, Panagiotis G., 1959-
Published: (1987)

Heat treatment of bimetals produced by selective laser melting of MS1 maraging steel on conventionally produced 42SiCr martensitic steel
by: Burdová, K., et al.
Published: (2022)

Modelling mechanical properties by analysing datasets of commercial alloys
by: Zander, Johan
Published: (2007)

Improvement of endurance limit of alloy steel by electroplating
by: Quirós, José Mario, 1938-
Published: (1962)

Cannot write session to /tmp/vufind_sessions/sess_f24v83vh8uldi11blt5gp57ne1