Improved design of the support structure for the NOWITECH 10 MW Reference Turbine
The aim of this thesis is to improve the support structure for the Nowitech 10 MW reference turbine (NRT) by optimizing the thickness and diameter of legs and braces section by section. This is a so called full-height lattice tower, and has been successfully optimized for a single load case in previ...
Main Author: | Sandal, Kasper |
---|---|
Format: | Others |
Language: | English |
Published: |
Norges teknisk-naturvitenskapelige universitet, Institutt for konstruksjonsteknikk
2014
|
Online Access: | http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-25483 |
Similar Items
-
Design of Nacelle and Yaw Bearing for NOWITECH 10 MW Reference Turbine
by: Bredesen, Kristian Opsahl
Published: (2014) -
Design and Dynamic Modeling of the Support Structure for a 10 MW Offshore Wind Turbine
by: Crozier, Aina
Published: (2011) -
Efficiency calculation on 10 MW experimental steam turbine
by: Hoznedl Michal
Published: (2018-01-01) -
Aeroelastic Instability and Flutter for a 10 MW Wind Turbine
by: Vatne, Sigrid Ringdalen
Published: (2011) -
Wet steam wetness measurement in a 10 MW steam turbine
by: Kolovratník Michal, et al.
Published: (2014-03-01)