Summary: | Windy Scandinavia is the manufacturer of the luxury yacht Windy 52 Xanthos. There is a storage application in the aft sofa on the boat that doesn’t live up to the standard and functionality level that Windy represents. This report describes the mechanical design process of this storage application, which currently has bad functionality and is expensive for Windy in production. The aim of the project was to develop the existing storage application to a low cost application. Simple and effective for Windy to produce and assemble, with the directives of access to the front or from above to the sofa. A feasibility study of the existing application was made to get a picture of disadvantages and advantages to keep for further concepts. The concept development included three steps; each step implied further development in level of detail. Starting with a range of concepts covering all different possibilities of access to the storage space, and ending up with a couple of concepts developed in detail with costs and knowledge of productions methods. The result became a standard application; a hatch with gas dampers. The reasons why this became the result was because of the low cost, simplicity and functionality. Small modifications of existing moulds and no new components or production methods needed. Conclusion of the result is that it fulfils the requirement specification and thereby is a proper result. The conceptual design phase generated many different concepts, from these concepts a result satisfying the requirements emerged.
|