Mineralogical characterisation of the Rockliden antimony-bearing volcanic-hosted massive sulphide deposit, Sweden

• Main Author: Minz, Friederike
• Format: Others
• Language: English
• Published: Luleå tekniska universitet, Geovetenskap och miljöteknik 2013
• Subjects: Geology; Geologi
• Online Access: http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-17621; http://nbn-resolving.de/urn:isbn:978-91-7439-791-8; http://nbn-resolving.de/urn:isbn:978-91-7439-792-5

Rockliden is a polymetallic Zn-Cu volcanic-hosted massive sulphide (VHMS) deposit. It is located in north-central Sweden about 150 km south of the Skellefte ore district. Two major challenges to mining and production were identified soon after Rockliden was discovered in the 1980’s. Firstly, the geographic distance to Boliden’s main ore deposits and existing concentrator in the Skellefte district will set additional financial and logistic constrains for the processing of the ore. Secondly, the locally high Sb grade in the ore potentially lowers the quality of the Cu-Pb concentrate sent to the Cu smelter. To face the second challenge to mining and production, it is necessary to use information from three disciplines: ore geology, mineral processing and process metallurgy. The three disciplines build the geometallurgical framework of the Rockliden ore characterisation. The purpose of this investigation is to outline which mineralogical factors are the cause of the elevated Sb content in the Cu-Pb concentrate. Determining such factors will help to predict the Sb content of this product and thus outline the tools required before decisions may be reached with regard to selection between various processing alternatives for the Rockliden ore. Hydrometallurgical treatment of the Cu-Pb concentrate has previously been studied by Awe (2013) and it was found that alkaline sulphide leaching can be used to lower the Sb content.A qualitative characterisation of the ore forms the main focus of this licentiate thesis. Minerals have been identified and their chemical composition has been obtained with micro-analytical tools (SEM/EDS &amp; EPMA/WDS) to study the mineralogical distribution of major (e.g. Zn, Cu, Fe), penalty (e.g. Sb) and bonus (e.g. Ag) metals. Furthermore, mineral textures and associations have been studied in ore samples by optical microscopy and SEM/BSE imaging. Ore types are preliminary classified based on the sulphide mineralogy, i.e. the relative content of pyrite, pyrrhotite, magnetite, sphalerite and chalcopyrite estimated by reflected light microscopy. As sphalerite and chalcopyrite form the main Cu- and Zn-bearing minerals at Rockliden, the content of these two minerals can be approached with element-to-mineral conversion based on standard drill core assays (including S, Cu, Zn, Pb, As, Sb and Ag). The mineralogy of Sb-bearing minerals is complex and a single thin section can contain more than three different Sb-bearing phases. Thus, the element-to-mineral conversion is not applicable in directly calculating the modal mineralogy of the Sb-bearing mineral fraction based on drill core assays. Additionally, it is shown that the mineral association of the Sb-bearing minerals is complex. Products from initial flotation tests have been studied and the preliminary conclusion is that the complex intergrowths with various minerals influence the distribution of Sb-bearing minerals between the flotation products. Thus, a more detailed petrographic study on the massive sulphides and their host rocks was conducted. The sulphide and non-sulphide mineralogy of the host rocks and ore types are shown to be variable. It is also shown that the host rock types can be distinguished based on their trace element eochemistry, supporting the geological classification based on drill core logging.Based on petrographic and mineralogical observations done in this study, potential process-relevant rock-intrinsic factors are outlined. However, to evaluate the impact of such parameters on the beneficiation process, these parameters have to be quantified throughout the Rockliden deposit and this is the focus of continued studies. SEM-based automated mineralogy tools will be essential in measuring the important parameters such as modal mineralogy and mineral liberation. Quantitative information will then be used in a larger framework to build a geometallurgical model usable for production planning. === <p>Godkänd; 2013; 20131021 (frimin); Tillkännagivande licentiatseminarium 2013-11-22 Nedanstående person kommer att hålla licentiatseminarium för avläggande av teknologie licentiatexamen. Namn: Friederike Elisabeth Minz Ämne: Malmgeologi/Ore Geology Uppsats: Mineralogical Characterisation of the Rockliden Antimony-Bearing Volcanic-Hosted Massive Sulphide Deposit, Sweden Examinator: Associate Professor Christina Wanhainen, Institutionen för samhällsbyggnad och naturresurser, Luleå tekniska universitet Diskutant: Associate Professor Kurt Aasly, Department of Geology and Mineral Resources Engineering, NTNU, Trondheim, Norway Tid: Måndag den 16 december 2013 kl 10.00 Plats: F341, Luleå tekniska universitet</p>