Friction of wood on steel

Friction of wood on steel

This thesis deals with the experimental description of friction between steel and wood materials, specifically laminated veneer lumber (LVL) and pine wood with two types of annual rings. It studies the influence of a number of different parameters on the coefficient of friction such as contact press...

Full description

Bibliographic Details
Main Authors:	Koubek, Radek, Dedicova, Karolina
Format:	Others
Language:	English
Published:	Linnéuniversitetet, Institutionen för byggteknik (BY) 2014
Subjects:	Friction wood steel moisture coefficient of friction contact pressure LVL laminated veneer lumber pine fiber direction
Online Access:	http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-35094

Similar Items

The effects of some factors on the impact bending strength of laminated veneer lumber
by: Bekir Cihad Bal, et al.
Published: (2012-11-01)

Potential Use of Waste Marble Powder as an Adhesive Filler in the Manufacture of Laminated Veneer Lumber
by: Kadir Ozkaya, et al.
Published: (2015-01-01)

THE EFFECTS OF WOOD SPECIES, LOAD DIRECTION, AND ADHESIVES ON BENDING PROPERTIES OF LAMINATED VENEER LUMBER
by: Bekir Cihad Bal,, et al.
Published: (2012-05-01)

Density Profile Analysis of Laminated Beech Veneer Lumber (BauBuche)
by: Nick Engehausen, et al.
Published: (2021-05-01)

THE EFFECTS OF THE FORCE LOADING DIRECTION ON BENDING STRENGTH AND MODULUS OF ELASTICITY IN LAMINATED VENEER LUMBER (LVL)
by: Murat Kılıç
Published: (2011-06-01)

MECHANICAL PROPERTIES ANALYSIS AND RELIABILITY ASSESSMENT OF LAMINATED VENEER LUMBER (LVL) HAVING DIFFERENT PATTERNS OF ASSEMBLY
by: Bing Xue,, et al.
Published: (2012-02-01)

The effect of layer’s moisture content and pre-heating by microwave radiation on physical and mechanical properties of laminated veneer lumber
by: Mohammad Farajallahpour, et al.
Published: (2017-05-01)

Effects of press pressures on glue line thickness and properties of laminated veneer lumber glued with phenol formaldehyde adhesive
by: Ramazan Kurt, et al.
Published: (2012-11-01)

Combustion Properties of Laminated Veneer Lumbers Bonded With PVAc, PF Adhesives and Impregnated With Some Chemicals = Bazi Kimyasallarla Emprenye Edilmiş ve PF ve PVAc Tutkali ile Yapıştırılan Lamine Ağaç Malzemelerin Yanma Özellikleri
by: Şeref KURT, et al.
Published: (2006-01-01)

New Perspectives for LVL Manufacturing from Wood of Heterogeneous Quality—Part. 1: Veneer Mechanical Grading Based on Online Local Wood Fiber Orientation Measurement
by: Robin Duriot, et al.
Published: (2021-09-01)

EFFECTS OF PRESS PRESSURE ON GLUE LINE THICKNESS AND PROPERTIES OF LAMINATED VENEER LUMBER GLUED WITH MELAMINE UREA FORMALDEHYDE ADHESIVE
by: Ramazan Kurt,, et al.
Published: (2012-07-01)

Using Acoustic Sensors to Improve the Efficiency of the Forest Value Chain in Canada: A Case Study with Laminated Veneer Lumber
by: Roger E. Hernández, et al.
Published: (2011-05-01)

Interfacial Adhesion and Damping Characteristics of Laminated Veneer Lumber Intercalated with Rubber Sheets
by: Jingquan Han, et al.
Published: (2016-06-01)

An Experimental Investigation of Structural Composite Lumber Loaded by a Dowel in Perpendicular to Grain Orientation at Yield and Capacity
by: Finkenbinder, David Edward
Published: (2014)

Desempenho físico-mecânico de painéis LVL de pinus tropicais da região de São Paulo
by: Gabriel, Maria Sílvia Chiaradia [UNESP]
Published: (2014)

SUITABILITY OF THREE HYBRID POPLAR CLONES FOR LAMINATED VENEER LUMBER MANUFACTURING USING MELAMINE UREA FORMALDEHYDE ADHESIVE
by: Ramazan Kurt
Published: (2010-07-01)

Static Bending Performance of Mengkulang and Kasai LVL Beam in Structural Size
by: Ahmad, Z., et al.
Published: (2021)

EFFECTS OF SOME IMPREGNATION CHEMICALS ON COMBUSTION CHARACTERISTICS OF LAMINATED VENEER LUMBER (LVL) PRODUCED WITH OAK AND POPLAR VENEERS
by: Seref Kurt, et al.
Published: (2010-02-01)

New Perspectives for LVL Manufacturing from Wood of Heterogeneous Quality—Part 2: Modeling and Manufacturing of Variable Stiffness Beams
by: Robin Duriot, et al.
Published: (2021-09-01)

EVALUATION OF THE KINETIC FRICTION COEFFICIENT BY USING „DISCBLOCK“ FRICTION PAIR OF DIFFERENT WOODEN SAMPLES
by: Djordje VUKELIC, et al.
Published: (2019-06-01)

Determination of Screw Withdrawal Strength of Heat-Treated and Reinforced Laminated Veneer Lumber
by: Osman Perçin
Published: (2016-01-01)

Investigation of Single and Two Bolt Connections Perpendicular to Grain in Laminated Veneer Lumber
by: Patel, Monil Chintan
Published: (2014)

Investigation of Effects of Strip Metals and Relative Sliding Speeds on Friction Coefficients by Reversible Strip Friction Tests
by: Yeong-Maw Hwang, et al.
Published: (2020-10-01)

Bending strength and stiffness of structural laminated veneer lumber manufactured from fast-growing Argentinean Eucalyptus grandis
by: J Saviana, et al.
Published: (2009-01-01)

THERMAL CONDUCTIVITY OF LAMINATED VENEER LUMBERS BONDED WITH VARIOUS ADHESIVES AND IMPREGNATED WITH VARIOUS CHEMICALS
by: Burhanettin Uysal, et al.
Published: (2009-05-01)

WETTABILITY OF FIRE RETARDANT TREATED LAMINATED VENEER LUMBER (LVL) MANUFACTURED FROM VENEERS DRIED AT DIFFERENT TEMPERATURES
by: Zeki Candan, et al.
Published: (2009-11-01)

The Influence of the Contact Pressure on the Value of the Coefficient of Friction
by: I. Bijelić, et al.
Published: (2017-06-01)

Feasibility Study of Mass-Timber Cores for the UBC Tall Wood Building
by: Thomas Connolly, et al.
Published: (2018-08-01)

Comparison of Shear Modulus Test Methods
by: Harrison, S. Kate
Published: (2014)

Reactions with Wood Carbohydrates and Lignin of Citric Acid as a Bond Promoter of Wood Veneer Panels
by: Claudio Del Menezzi, et al.
Published: (2018-07-01)

INFLUÊNCIA DE DIFERENTES COMBINAÇÕES DE LÂMINAS DE Eucalyptus saligna E Pinus taeda EM PAINÉIS ESTRUTURAIS LVL
by: Müller, Marcos Theodoro
Published: (2009)

Estimating Friction Coefficient and Fraction of Sliding in Friction Stir Welding
by: Zhihan Zhang, et al.
Published: (2014-03-01)

Frictional Properties of Carbon-Carbon Composites and Their Relation to Fiber Architecture and Microstructure
by: Lim, Wei Jun
Published: (2016)

Some physical properties of laminated veneer lumbers (LVLs) produced from rotary-peeled veneers of eucalyptus, beech, and poplar
by: Bekir Bal, et al.
Published: (2013-04-01)

Effects of Steaming, Drying Temperature, and Adhesive Type on Static Bending Properties of LVL made of Picea orientalis and Abies nordmanniana veneers
by: Huseyin Peker, et al.
Published: (2014-11-01)

PROPERTIES OF LAMINATED VENEER LUMBER MANUFACTURED FROM HEAT TREATED VENEER
by: Hamiyet Sahin KOL, et al.
Published: (2016-06-01)

Active control of friction by transverse oscillations
by: J. Benad, et al.
Published: (2018-03-01)

A Holistic Approach Towards Surface Topography Analyses for Ice Tribology Applications
by: Janis Lungevics, et al.
Published: (2021-06-01)

Establishing of Rolling - Friction Coefficient, for Hertzian Contacts Between Steel Balls and Different Kinds of Thermochemical Treated Steel Surfaces
by: Daniel MUNTEANU
Published: (2005-11-01)

Proposta de um método de ensaio para o controle de qualidade na produção de elementos estruturais de MLC e LVL
by: Rodrigo de Souza Nogueira
Published: (2017)