| Summary: | In this work, an existing RAM generator is analysed and evaluated. Some of the aspects that were considered in the evaluation are the optimization of the basic SRAM cell, how the RAM generator can be ported to newer technologys, automating the simulation process and the creation of the workflow for the energy model. One of the main focus of this thesis work is to optimize the basic SRAM cell. The SRAM cell which is used in the RAM generator is not optimized for area nor power. A compact layout is suggested which saves a lot of area and power. The technology that is used to create the RAM generator is old and a suitable way to port it to newer technology has also been found. To create an energy model one has to simulate a lot of memories with a lot of data. This cannot be done in the traditional way of simulating circuits using the GUI. Hence an automation procedure has been suggested which can be made to work to create energy models by simulating the memories comprehensively. Finally, basic ground work has been initiated by creating a workflow for the creation of the energy model.
|
|---|
