Acceptance Tests – FAT & SAT : An Empirical Case Study of Utility Poles

• Main Author: Al Farra, Hussni
• Format: Others
• Language: English
• Published: Linköpings universitet, Logistik- och kvalitetsutveckling 2016
• Subjects: Factory acceptance test; quality control; quality inspection; utility poles; quality management
• Online Access: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-132288

The overall purpose of this project is to devise improved quality acceptance procedures to examine quality characteristics of utility poles at the factory of the supplier (FAT) and on-site upon receipt by the customer (SAT). To that end, the thesis draws upon available standards, literature, and industry practices regarding wood, fiberglass and steel poles. As far as the design of the research, a single case study of a major power company was chosen. Then, a data collection plan was developed in order to build upon the existing knowledge found in the literature, and upon the data that can be collected from three of the Company’s suppliers, in addition to the Technical Research Institute of Sweden (SP). Documents’ analysis, interviews, observations, and a survey were the tools of that plan. It was found that criteria, inspection and test methods of wood poles are all sufficiently covered in the standards and the literature; for wood is the most commonly used material for utility poles. Next, in coverage of research, are the steel poles; while there is currently no standard that covers fiberglass utility poles. Indeed, quality characteristics, criteria, and acceptance procedures can altogether form parts of a sustainable solution, as long as the quality is managed as a process whether at the Company’s end or at the fabrication sites; that is especially true if there is some form of backward partnership between the Company and its suppliers.