| Summary: | Nowadays, mobile phones have greater functionality; a camera, color LCD screen, wireless LAN, Bluetooth, IrDA and others. In the near future wider variety of new functionalities will be added, from high quality voice, high definition video to high data rate wireless channels. As consumer electronics integrate greater functionality and high operating frequencies, their emissions will exceed the specified limits, most of these emissions will be a result of the internal interferences in the mobile phone. Moreover higher operating frequencies will be required to improve the quality of these functionalities, something that will make it more difficult to control these interferences. Internal or external sources of electromagnetic interference can degrade the performance of sensitive analog/digital circuits inside the mobile phone. Moreover the electronic device must satisfy a host of global regulations that limit it’s susceptibility to these interferences, as well as the interference emitted by the device itself. Therefore designing a new electronic device to perform new and exciting functions will not be a pleasant task if it can not meet certain specifications and function as required to adhere to certain global regulations. This thesis project investigates the sources of interference inside a mobile phone; mainly the electromagnetic interferences and its effect on the radio transceiver focusing on the GSM receiver sensitivity. This report is a result of intensive research, an investigation of possible sources of interference, also actual measurements were performed; RSSI, OTA and sniffing measurements; to identify the physical sources of interferences, and their effect on the receiver sensitivity. Finally solutions were recommended and implemented to suppress the interferences due to different sources, mainly through filtering, shielding or proper grounding of signals and components/subsystems in the mobile phone.
|
|---|
