Ink Film Splitting Acoustics in Offset Printing

• Main Author: Voltaire, Joakim
• Format: Doctoral Thesis
• Language: English
• Published: KTH, Ytkemi 2006
• Subjects: Surface and colloid chemistry; Yt- och kolloidkemi
• Online Access: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3869; http://nbn-resolving.de/urn:isbn:91-7178-261-3

This thesis claims a relationship between the film splitting sound emission from the printing press nip and the dynamic interaction occurring there between ink, fountain solution and substrate in offset lithography. The film splitting sound derives from the cavitation formed by the pressure drop in the second half of the print nip flow passage. As the ink film is strained, the cavities expand and eventually implode into breaking filaments at the nip exit, while emitting a partly audible, broadband, high frequency, noisy sound. A free-field microphone, A/D-converter and laptop computer were used to record pressure signals in the frequency range of 10 Hz to 50 kHz emitted by a variety of printing instruments and presses for a range of offset ink and paper types. After signal acquisition and filtering two signal averages of power and frequency were estimated. This average power increased with increasing loads of sheet-fed offset ink on an ink distributor, in accordance with a mass-conservation model developed. The behaviour of average frequency and power over different ink load ranges indicated transitions between different flow regimes. A glossy fine-coated paper gave higher average power than a corresponding matte paper during printing with such inks on a laboratory device, possibly due to an air sealing effect. The sound from tack measurements with the Deltack instrument during setting of heat-set offset inks printed on MWC papers showed a relation between the measured tack rise and average power, reflecting changes in splitting mechanism during the course of setting. With the Hydroscope instrument the interaction between these heat-set inks and fountain solution was studied, with the measured tack and sound emission displaying a clear, but non-linear, correlation. A heat-set offset pilot trial showed that the acoustic response from the printing nip sensitively and systematically detected changes in (LWC) paper type, optical density, ink-fount balance, and press stability. Pilot trials of cold-set offset inks on newsprint by sheet-fed presses indicated a strong correlation between evolution in average power, optical density and fountain solution consumption during the first thousand sheets normally needed for stabilisation. Acoustic measurements of ink film splitting have, aside from the laboratory studies performed by one Japanese group, previously received little attention, with the current study showing that a great deal of information useful to the printer can be accessed from this sound emission. Although the detailed mechanisms for ink film splitting have to be further studied and supported by mathematical simulation, the sensitivity of the acoustic method recommends its implementation for monitoring and control of offset printing. === QC 20100928