Modelling of surface initiated rolling contact fatigue crack growth using the asperity point load mechanism

Modelling of surface initiated rolling contact fatigue crack growth using the asperity point load mechanism

QC 20110523

Bibliographic Details
Main Author:	Hannes, Dave
Format:	Others
Language:	English
Published:	KTH, Hållfasthetslära (Avd.) 2011
Subjects:	rolling contact fatigue spalling asperity fatigue crack path fatigue crack growth mode I plane mixed-mode TECHNOLOGY TEKNIKVETENSKAP
Online Access:	http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-34005

Similar Items

Growth of cracks at rolling contact fatigue
by: Hannes, Dave
Published: (2008)

Crack path modelling in railway wheel under rolling contact fatigue
by: Kotoul M.
Published: (2015-12-01)

A study on contact fatigue mechanisms
by: Alfredsson, Bo
Published: (2000)

The effect of steady torsion on fatigue crack growth under rotating bending loading on aluminium alloy 7075-T6
by: M. da Fonte, et al.
Published: (2014-09-01)

The effect of steady torsion on fatigue crack growth under rotating bending loading on aluminium alloy 7075-T6
by: M. da Fonte, et al.
Published: (2014-10-01)

Analysis of initial crack path in fretting fatigue
by: J. Vazquez, et al.
Published: (2016-06-01)

Analysis of initial crack path in fretting fatigue
by: J. Vázquez, et al.
Published: (2016-07-01)

Measurement and simulation of crack growth rate and direction under non-proportional loadings
by: Y. Hos, et al.
Published: (2015-10-01)

Multiaxial fatigue crack path prediction using critical plane concept
by: Jafar Albinmousa
Published: (2016-01-01)

Rail fatigue crack propagation in high-speed wheel/rail rolling contact
by: Xiaoyu Jiang, et al.
Published: (2017-07-01)

An Investigation on Spur Gear Rolling Contact Fatigue Crack Initiation and Crack Propagation under EHL Condition
by: Dharmarajan, Vignesh
Published: (2019)

Fatigue life prediction under mixed-mode loading using equivalent stress intensity factor models
by: Sajith S., et al.
Published: (2018-01-01)

Fretting Fatigue with Cylindrical-On-Flat Contact: Crack Nucleation, Crack Path and Fatigue Life
by: Nitikorn Noraphaiphipaksa, et al.
Published: (2017-02-01)

Numerical Analysis of Fatigue Crack Growth Path and Life Predictions for Linear Elastic Material
by: Abdulnaser M. Alshoaibi, et al.
Published: (2020-07-01)

Prediction of three-dimensional crack propagation paths taking high cycle fatigue into account
by: Guido Dhondt
Published: (2015-12-01)

Cracking directions in multiaxial low cycle fatigue at high and room temperatures
by: Masao Sakane, et al.
Published: (2017-06-01)

Cracking directions in multiaxial low cycle fatigue at high and room temperatures
by: Masao Sakane, et al.
Published: (2017-06-01)

Cracking directions in multiaxial low cycle fatigue at high and room temperatures
by: Masao Sakane, et al.
Published: (2017-07-01)

Controlling fatigue crack paths for crack surface marking and growth investigations
by: S. Barter, et al.
Published: (2015-12-01)

Controlling fatigue crack paths for crack surface marking and growth investigations
by: S. Barter, et al.
Published: (2015-12-01)

Prediction of Rolling Contact Fatigue Behavior in Rails Using Crack Initiation and Growth Models along with Multibody Simulations
by: Borja Rodríguez-Arana, et al.
Published: (2021-01-01)

Orientation of propagating crack paths emanating from fretting-fatigue contact problems
by: Eugenio Giner, et al.
Published: (2015-12-01)

Effect of defect length on rolling contact fatigue crack propagation in high strength steel
by: T. Makino, et al.
Published: (2015-09-01)

In situ observation of rolling contact fatigue cracks by laminography using ultrabright synchrotron radiation
by: Y. Nakai, et al.
Published: (2015-09-01)

Variable mode-mixity during fatigue cycles – crack tip parameters determined from displacement fields measured by digital image correlation
by: Michael Vormwald, et al.
Published: (2017-06-01)

Variable mode-mixity during fatigue cycles – crack tip parameters determined from displacement fields measured by digital image correlation
by: Michael Vormwald, et al.
Published: (2017-07-01)

Study of the Fatigue Crack Growth in Long-Term Operated Mild Steel under Mixed-Mode (I + II, I + III) Loading Conditions
by: Grzegorz Lesiuk, et al.
Published: (2020-01-01)

Orientation of propagating crack paths emanating from fretting-fatigue contact problems
by: Eugenio Giner, et al.
Published: (2016-01-01)

Algorithm for automatic fatigue crack growth simulation on welded high strength steels
by: Ricardo Miguel Gomes Simões Baptista, et al.
Published: (2019-03-01)

Algorithm for automatic fatigue crack growth simulation on welded high strength steels
by: R. Baptista, et al.
Published: (2019-04-01)

Fatigue Damage of an Asperity in Frictionless Normal Contact with a Rigid Flat
by: Zhou Chen, et al.
Published: (2021-03-01)

Prediction of three-dimensional crack propagation paths taking high cycle fatigue into account
by: Guido Dhondt
Published: (2016-01-01)

Measurement and simulation of strain fields around crack tips under mixed-mode fatigue loading
by: Y. Hos, et al.
Published: (2015-07-01)

Experimental and analytical study of cracks under biaxial fatigue
by: M. Mokhtarishirazbad, et al.
Published: (2016-06-01)

Experimental and analytical study of cracks under biaxial fatigue
by: M. Mokhtarishirazbad, et al.
Published: (2016-06-01)

Experimental and analytical study of cracks under biaxial fatigue
by: M. Mokhtarishirazbad, et al.
Published: (2016-07-01)

Crack tip fields in elastic-plastic and mixed mode I+II+III conditions, finite elements simulations and modeling
by: F. Fremy,, et al.
Published: (2015-07-01)

On the effect of microplasticity on crack initiation from subsurface defects in rolling contact fatigue
by: Kadin, Y., et al.
Published: (2022)

Multiaxial fatigue crack path prediction using critical plane concept
by: Jafar Albinmousa
Published: (2015-12-01)

Development of in-situ fatigue crack observing system for rotating bending fatigue testing machine
by: B. Lian, et al.
Published: (2015-12-01)