| Summary: | Injuries in the female gymnast are common and it is important to understand the biomechanical factors responsible for injury. The Back Walkover maneuver requires one of the greatest amounts of lumbar hyperextension compared to other common gymnastic maneuvers. During the Back Walkover large lateral and vertical impact forces follows on the spine. The spine and muscles around the spine have to absorb generally large forces; therefore the loads on the back and certainly on the lower back are of significant interest. Additionally, it takes a lot of strength and a vast range of motion to perform gymnastic maneuvers such as The Back Walkover. It is of interest to study mechanical loads on a female gymnast since they show higher occurrences of stress-related pathologies of the lumbar spine. Therefore the purpose of this project was to examine the loads on the spine during the gymnastic maneuver Back Walkover. Tests on a single female gymnast were made at the sports engineering lab at the University of Adelaide in Australia. Using the 3D-camera system; Optitrack Motion Capture System and Kistler Force Plate, positional data for two dimensions, X-direction (anterior-posterior) and Z-direction (vertical), and ground force were received. Data received were progressed into a graph, diagrams and biomechanical calculations where forces for the vertebrae L1 were calculated in vertical and horizontal direction. The received forces were compared to vertical and horizontal forces in L1 during standing position. Together with developed videos this assisted to model the loads of the spine (L1) during the gymnastic maneuver the “Back Walkover”. The study has led to a deeper knowledge for the community about the risks for female gymnasts and has widened the experience of the project participant, as the project aimed.
|
|---|
