| Summary: | A dominant source of Internet traffic, today, is constituted of compressed images. In modern multimedia communications, image compression plays an important role. Some of the image compression standards set by the Joint Photographic Expert Group (JPEG) include JPEG and JPEG2000. The expert group came up with the JPEG image compression standard so that still pictures could be compressed to be sent over an e-mail, be displayed on a webpage, and make high-resolution digital photography possible. This standard was originally based on a mathematical method, used to convert a sequence of data to the frequency domain, called the Discrete Cosine Transform (DCT). In the year 2000, however, a new standard was proposed by the expert group which came to be known as JPEG2000. The difference between the two is that the latter is capable of providing better compression efficiency. There is also a downside to this new format introduced. The computation required for achieving the same sort of compression efficiency as one would get with the original JPEG format is higher. JPEG is a lossy compression standard which can throw away some less important information without causing any noticeable perception differences. Whereas, in lossless compression, the primary purpose is to reduce the number of bits required to represent the original image samples without any loss of information. The areas of application of the JPEG image compression standard include the Internet, digital cameras, printing, and scanning peripherals. In this thesis work, a simulator kind of functionality setup is needed for conducting the objective quality assessment. An image is given as an input to our wireless communication system and its data size is varied (e.g. 5%, 10%, 15%, etc) and a Signal-to-Noise Ratio (SNR) value is given as input, for JPEG2000 compression. Then, this compressed image is passed through a JPEG encoder and then transmitted over a Rayleigh fading channel. The corresponding image obtained after having applied these constraints on the original image is then decoded at the receiver and inverse discrete wavelet transform (IDWT) is applied to inverse the JPEG 2000 compression. Quantization is done for the coefficients which are scalar-quantized to reduce the number of bits to represent them, without the loss of quality of the image. Then the final image is displayed on the screen. The original input image is co-passed with the images of varying data size for an SNR value at the receiver after decoding. In particular, objective perceptual quality assessment through Structural Similarity (SSIM) index using MATLAB is provided.
|
|---|
