| Summary: | In a water distribution system, Flow Control Valve is used to control the flow rate in the pipeline connections. In this thesis, a fixed flow control valve is investigated to reduce the flow rate and set to deliver the pre-set flow of 5-6 LPM (litre per minute). Which helps to distribute the water for a maximum period and maintains the usage only for the drinking purpose. A geometry of FCV with a ball check valve is implemented, where the ball check helps to stop the back flow of the fluid from the valve. Detailed inspection of dynamic changes in pressure and flow velocity in the valve are conducted through simulation. The study of fluid properties describes the expected design and specifies the flow structure in the valve. The results of this project demonstrate a good performance of the design-build and influence the requirements. The obtained values in the simulation, analytical and experimental results are compatible, which concludes the survey of FCV is equipped to custom.
|
|---|
