Development of an automated marking machine for live fish with application in fishery management
Spray marking of fish, using fluorescent pigment propelled by compressed air, is a mass marking technique, and is useful in the studies of fishery management. This method typically uses a conveyor system to transport fish into a marking unit that dispenses the powdered pigment through a nozzle wi...
Main Author: | |
---|---|
Format: | Others |
Language: | English |
Published: |
2009
|
Online Access: | http://hdl.handle.net/2429/4971 |
id |
ndltd-UBC-oai-circle.library.ubc.ca-2429-4971 |
---|---|
record_format |
oai_dc |
spelling |
ndltd-UBC-oai-circle.library.ubc.ca-2429-49712018-01-05T17:32:19Z Development of an automated marking machine for live fish with application in fishery management Dong, Chunli Spray marking of fish, using fluorescent pigment propelled by compressed air, is a mass marking technique, and is useful in the studies of fishery management. This method typically uses a conveyor system to transport fish into a marking unit that dispenses the powdered pigment through a nozzle with the aid of compressed air. The marked juvenile fish are then released to continue their life cycle, and may be subsequently caught for the purpose of experimental investigation. The previous design of the marking machine (MK-5) had many shortcomings. In particular, the pigment dust caused worker discomfort and possible environmental pollution, overlapping of fish on the conveyor resulted in poor marking quality, and improper feeding and conveying caused injury and mortality in fish during marking. Due to these, the marking machine MK-5 was not widely used. In the present work, a new prototype of the automated spray marking machine was designed and built in the Industrial Automation Laboratory at the University of British Columbia. The new design was based on studies related to pigment emulsion, compressed air pressure, zig-zag shaped feeder channel, conveyor belt compartmentalization and pigment recycling. Image processing for assessing the retention of fluorescent pigment mark on fish body was investigated by first developing retention indices, and subsequently using appropriate image processing techniques such as the dilation and erosion of mark density, in order to recover an aged mark. Our design developments have led to a fast, accurate, reliable, low-cost and environmentally friendly system for marking fish. The prototype has been tested at several hatchery sites in British Columbia and has thus far exhibited good performance. Applied Science, Faculty of Mechanical Engineering, Department of Graduate 2009-02-24 2009-02-24 1994 1994-05 Text Thesis/Dissertation http://hdl.handle.net/2429/4971 eng For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. 3323618 bytes application/pdf |
collection |
NDLTD |
language |
English |
format |
Others
|
sources |
NDLTD |
description |
Spray marking of fish, using fluorescent pigment propelled by compressed air, is a mass
marking technique, and is useful in the studies of fishery management. This method
typically uses a conveyor system to transport fish into a marking unit that dispenses the
powdered pigment through a nozzle with the aid of compressed air. The marked juvenile
fish are then released to continue their life cycle, and may be subsequently caught for
the purpose of experimental investigation. The previous design of the marking machine
(MK-5) had many shortcomings. In particular, the pigment dust caused worker discomfort
and possible environmental pollution, overlapping of fish on the conveyor resulted in
poor marking quality, and improper feeding and conveying caused injury and mortality
in fish during marking. Due to these, the marking machine MK-5 was not widely used. In
the present work, a new prototype of the automated spray marking machine was designed
and built in the Industrial Automation Laboratory at the University of British Columbia.
The new design was based on studies related to pigment emulsion, compressed air pressure,
zig-zag shaped feeder channel, conveyor belt compartmentalization and pigment
recycling. Image processing for assessing the retention of fluorescent pigment mark on
fish body was investigated by first developing retention indices, and subsequently using
appropriate image processing techniques such as the dilation and erosion of mark density,
in order to recover an aged mark. Our design developments have led to a fast, accurate,
reliable, low-cost and environmentally friendly system for marking fish. The prototype
has been tested at several hatchery sites in British Columbia and has thus far exhibited
good performance. === Applied Science, Faculty of === Mechanical Engineering, Department of === Graduate |
author |
Dong, Chunli |
spellingShingle |
Dong, Chunli Development of an automated marking machine for live fish with application in fishery management |
author_facet |
Dong, Chunli |
author_sort |
Dong, Chunli |
title |
Development of an automated marking machine for live fish with application in fishery management |
title_short |
Development of an automated marking machine for live fish with application in fishery management |
title_full |
Development of an automated marking machine for live fish with application in fishery management |
title_fullStr |
Development of an automated marking machine for live fish with application in fishery management |
title_full_unstemmed |
Development of an automated marking machine for live fish with application in fishery management |
title_sort |
development of an automated marking machine for live fish with application in fishery management |
publishDate |
2009 |
url |
http://hdl.handle.net/2429/4971 |
work_keys_str_mv |
AT dongchunli developmentofanautomatedmarkingmachineforlivefishwithapplicationinfisherymanagement |
_version_ |
1718586976862470144 |