| Summary: | The throughput capability of a high pressure grinding roll (HPGR), a critical process parameter, has been found to heavily depend on the sample type being processed. Existing HPGR test methods require the use of pilot machines and large sample quantities to assess the throughput characteristics of a certain ore type. Addressing the need for a laboratory scale HPGR test, a laboratory procedure was proposed to assess the throughput capability of mineral samples. Existing procedures were adopted from the fields of terramechanics and soil mechanics, and used as a basis for predictive HPGR throughput models. The applicability of the proposed tests was assessed through the comparison of predicted throughput with observed values from pilot HPGR testing. Results showed that outcomes of the proposed laboratory scale tests were statistically significant when used for the prediction of HPGR throughput. Primarily, the frictional properties of feed samples, as characterized by a direct shear box test, were found to be of particular significance. An approach to modelling the pressure profile which occurs on the HPGR roller surface was also proposed for potential use in a force-based model. Based on the results, an approach to HPGR testing requiring a reduced amount of sample was presented. Further work on characterizing the frictional properties of mineral samples was recommended. Analysis of HPGR outcomes indicated that strong relationships exist between power, throughput and roll gap, hence holistic approaches to HPGR modelling may be most appropriate for future predictive models. === Applied Science, Faculty of === Mining Engineering, Keevil Institute of === Graduate
|
|---|
