A practical model for load-unload-reload cycles on sand

• Main Author: Dabeet, Antone E.
• Format: Others
• Language: English
• Published: University of British Columbia 2009
• Subjects: Constitutive modelling; Cyclic loading; Sands
• Online Access: http://hdl.handle.net/2429/4082

The behaviour of sands during loading has been studied in great detail. However, little work has been devoted to understanding the response of sands in unloading. Drained triaxial tests indicate that, contrary to the expected elastic behaviour, sand often exhibit contractive behaviour when unloaded. Undrained cyclic simple shear tests show that the increase in pore water pressure generated during the unloading cycle often exceeds that generated during loading. The tendency to contract upon unloading is important in engineering practice as an increase in pore water pressure during earthquake loading could result in liquefaction. This research contributes to filling the gap in our understanding of soil behaviour in unloading and subsequent reloading. The approach followed includes both theoretical investigation and numerical implementation of experimental observations of stress dilatancy in unload-reload loops. The theoretical investigation is done at the micromechanical level. The numerical approach is developed from observations from drained triaxial compression tests. The numerical implementation of yield in unloading uses NorSand — a hardening plasticity model based on the critical state theory, and extends upon previous understanding. The proposed model is calibrated to Erksak sand and then used to predict the load-unload-reload behaviour of Fraser River sand. The trends predicted from the theoretical and numerical approaches match the experimental observations closely. Shear strength is not highly affected by unload-reload loops. Conversely, volumetric changes as a result of unloading-reloading are dramatic. Volumetric strains in unloading depend on the last value of stress ratio (q/p’) in the previous loading. It appears that major changes in particles arrangement occur once peak stress ratio is exceeded. The developed unload-reload model requires three additional input parameters, which were correlated to the monotonic parameters, to represent hardening in unloading and reloading and the effect of induced fabric changes on stress dilatancy. The calibrated model gave accurate predictions for the results of triaxial tests with load-unload-reload cycles on Fraser River sand. === Applied Science, Faculty of === Civil Engineering, Department of === Graduate