Summary: | In commercial polymer processing operation such as extrusion, film blowing and blow
molding, product quality and production rate are limited by the appearance of flow
instabilities. This flow instability is manifested as distortions on the extrudate surface (melt fracture), usually observed at high production rates. Fluoropolymers have long been used as processing aids for surface melt fracture treatment of polyolefin extrudates. Recent developments have shown that a small amount of Boron Nitride (BN) powder successfully eliminates surface melt fracture and also delays the onset of gross melt fracture. It is also observed that a combination of BN and Fluoropolymer enhances the performance of the extrusion even further. The main objective of the present work is to
estimate surface properties of BN mainly surface energy and adsorption capacity to
understand its influence in the performance of different grades of BN as processing aids.
Based on this study, it can be concluded that surface energy plays a very important role in deciding the possible interaction between the processing aid, polymer melt and the extruding surface. It is observed that lubricious nature of BN along with an optimum
balance of surface energy and polarity makes BN (grades: AS 612 and CTF5) successful
in both sharkskin as well as gross melt fracture regions. === Applied Science, Faculty of === Chemical and Biological Engineering, Department of === Graduate
|