A Novel Five-axis Machining Process with Visualized Space to Optimize the Workpiece Setup Position for the Shortest Axial Movements

A Novel Five-axis Machining Process with Visualized Space to Optimize the Workpiece Setup Position for the Shortest Axial Movements

博士 === 國立臺灣科技大學 === 機械工程系 === 107

Bibliographic Details
Main Authors:	Ching-Chih Wei, 韋經智
Other Authors:	Wei-Chen Lee
Format:	Others
Language:	zh-TW
Published:	2019
Online Access:	http://ndltd.ncl.edu.tw/handle/77ubzw

Similar Items

Optimization of the setup position of a workpiece for five-axis machining to reduce machining time
by: Ching-chih Wei, et al.
Published: (2020-12-01)

Applying Visibility Theorem to Optimize the Five-axis Machining Setup Height and Tool-axis Angle
by: Ching-chih Wei, et al.
Published: (2014)

Study on Rotation Axial Positioning Accuracy of Five - axis Machine by Taguchi Method
by: Shou-Zheng Huang, et al.
Published: (2017)

New Approaches to Determining Shortest Cutters and Work Piece Setups without Over-travel for 5-axis CNC Machining
by: Ahmed, Aqeel
Published: (2013)

Volumetric Errors Analysis and Compensation of Elastic Deformation of Thin Workpiece in Five-Axis Virtual Machining
by: Ling-ChenHuang, et al.
Published: (2013)

Using a Five Axis Machine Tool to Reserch the Wedge Angle used to Hold the Trapezoidal Workpiece
by: WANG,CHUN-HSIANG, et al.
Published: (2017)

Five-axis Machining Process Planning Research for Axial-flow Compressor Impeller
by: Jung-Chao Hung, et al.
Published: (2006)

Analysis of Mechanism Error for Five-Axis Machine Tools
by: Chih-Cheng Shiao, et al.
Published: (2005)

Dual-Bézier path smoothing and interpolation for five-axis linear tool path in workpiece coordinate system
by: Yongqiao Jin, et al.
Published: (2015-07-01)

Roughness measurements of machined workpieces
by: Ward, R. L.
Published: (1992)

A study on the residual stresses of the machined workpiece and the effect of the thermal load on of the stresses of the machined workpiece
by: 林有鎰
Published: (1987)

Study on Workpiece Orientation and the Configuration of Multi-Axis Machine Tool Using the Analysis of Visibility Cone
by: Yao-Chien Chen, et al.
Published: (2002)

Study on Workpiece Orientation and the Configuration of Multi-Axis Machine Tool Using the Analysis of Visibility Cone
by: Yao-Chien Chen, et al.
Published: (2002)

Path Planning of Five-Axis Machining for Centrifugal Impeller and the Application of Reverse Engineering for axial blade
by: CHEN, JUN-JIE, et al.
Published: (2018)

Cutter-workpiece engagement identification in multi-axis milling
by: Aras, Eyyup
Published: (2008)

Cutter-workpiece engagement identification in multi-axis milling
by: Aras, Eyyup
Published: (2008)

Cutter-workpiece engagement identification in multi-axis milling
by: Aras, Eyyup
Published: (2008)

Analysis of Measured Workpiece's Form Errors Influence on the Accuracy of Probe Heads Used on Five-Axis Measuring Systems
by: Wiktor Harmatys, et al.
Published: (2017-12-01)

A solid-analytical-based model for extracting cutter-workpiece engagement in 5-axis flank machining
by: Li Dongdong, et al.
Published: (2018-01-01)

Rule Based Setup and Fixture Planning for Prismatic Parts on 3-Axis and 4-Axis Milling Machines.
by: Wakhare, Mayur M.,
Published: (2016)

A Study of Tool Orientation Planning for Five-axis Surface Machining
by: Wei-Lin Lee, et al.

The Development of Hybrid Five-Axis Robot
by: LIU,Wei-Chih, et al.
Published: (2017)

Computation and verification of workpiece shape in electrochemical machining
by: Nanayakkara, M. B.
Published: (1977)

The effect of workpiece temperature on the performance of the machining of FRP
by: Wang, Gwo Dong, et al.
Published: (1997)

Study of the Parallel Precision Positioning Platform in Five-axis Machine Tools Design
by: Chen-Yu Lin, et al.
Published: (2013)

The Compensation of Thermal Errors in Five-Axis Machine Tools
by: Yang Chih-chin, et al.
Published: (2000)

Five axis machining of stamping dies
by: Zeni, Mark I. (Mark Ivano)
Published: (2007)

The Investigation of Design Parameters and Five-axis Machining Planning for Centrifugal Pump
by: Shiang-Jr Juang, et al.
Published: (2005)

Process Requirement Modeling for Machined faces of a workpiece
by: Lee, Meng-Jung, et al.
Published: (2017)

Workpiece Machining Accuracy Prediction Based on Milling Simulation
by: Lv Yan-peng, et al.
Published: (2016-01-01)

Optimization of the Workpiece Location in a Machining Robotic Cell
by: António M. Lopes, et al.
Published: (2011-12-01)

Optimization of the Workpiece Location in a Machining Robotic Cell
by: António M. Lopes, et al.
Published: (2011-12-01)

The Effect of Workpiece Temperature on The Machining of Metal Matrix Composites
by: Lin ,Chia-Home, et al.
Published: (1995)

An electrical resistance workpiece heating technique for hot machining
by: Barrow, G.
Published: (1965)

The prediction of tool and workpiece shapes in electro-chemical machining
by: Lawrence, Peter
Published: (1977)

Dynamic Contour Error Modeling and Analysis for Five-axis Machining
by: Hu Ching Wen, et al.
Published: (2000)

Inspecting the surface Roughness of Ultraprecision-Machining Workpieces by Machine Vision Technique
by: Hsieh-Ting Li, et al.
Published: (2008)

Automatic Compensation of Workpiece Positioning Tolerances for Precise Laser
by: N. C. Stache, et al.
Published: (2008-01-01)

Application of Fractal Path in Five-axis Machining
by: Ke-Jun Chen, et al.
Published: (2009)

The Integrated Study of Five-axis Machining Process
by: Wen-Hsiang Chen, et al.
Published: (2000)