| Summary: | 碩士 === 國立臺北科技大學 === 機械工程系機電整合碩士班 === 106 === The purpose of this study was to analyze and design the bath accessories, including the head
cushion, handrails, back racks, seat racks, cushion racks, seat belts, foot support, foot-type
clamping mechanism, pneumatic rod composition of the main structure, design features are
the use of four-link motion generator, do forward tilt, posture, backward three different
postures of the conversion, The effect is adjusted by foot-type clamping mechanism and
pressure bar. Tilt position for cushion lift height so that caregivers can easily clean the
buttocks of the caregiver, back posture to wash the head, and with a head cushion, so that the
caregiver can comfortably wash the head.The use of pneumatic rods to support the weight of
the body, to facilitate the movement of the smooth and stable change posture. This study first
collects the relevant patents and classifies and analyzes them, according to the requirements
and constraints of the design can be summed up the type synthesis of the mechanism, and
then according to the constraints of the geometric size of each part of the size of the synthesis,
complete the size of the design of the detail after the design of the detailed parts, with
computer-aided programming software to build a 3D model and carry.To verify that the 3D
model without interference and confirm the new design of the bath accessory can produce the
exact movement, in the end, the prototype of the bath accessory is tested.
|
|---|
