Robust Design of Sleeves for Copper Conductor of Cable

• Main Authors: Ting-Syun Chen, 陳亭勳
• Other Authors: Ying-Yi Hong
• Format: Others
• Language: zh-TW
• Published: 2018
• Online Access: http://ndltd.ncl.edu.tw/handle/dgc95y

碩士 === 中原大學 === 電機工程研究所 === 106 === In recent years, the share of underground cables has increased due to the influence of Taiwan’s environment. Future research and discussion should focus on the reduction of cost and enhancement of safety and security for these underground cables. This thesis mainly focuses on temperature and cost of the copper sleeves for copper conductors that are mainly used in cabling. This thesis uses the Taguchi''s method to simulate a factorial design of experiments. First is to identify the control factors. Then the level of each factor is determined. Selection of the orthogonal array is then established. Finally, output-to-noise ratio analysis is performed. The result is determined by analyzing the factor response of copper case temperature, S / N ratio, and quality characteristics to get the optimal solution. The volume and the weight of the experimental combination of the Taguchi''s method are calculated, and the price is judged according to the international basic metal price. After performing the calculations, the original fabrication and the optimal solution are compared to verify that the optimal solution is cheaper.