The antibacterial performance of PEEK substrates using 3D printing technology

The antibacterial performance of PEEK substrates using 3D printing technology

碩士 === 長庚大學 === 化工與材料工程學系 === 106

Bibliographic Details
Main Authors:	Min Hua Tsai, 蔡旻樺
Other Authors:	K. W. Cheng
Format:	Others
Language:	zh-TW
Published:	2018
Online Access:	http://ndltd.ncl.edu.tw/handle/c4r7w5

Similar Items

The study of drug release and antibacterial performances of 3D printing PEEK substrates with surface modification of ZnO/TiO2 nanorod arrays
by: Yin Cheng Lai, et al.
Published: (2019)

Neutron Shielding Performance of 3D-Printed Boron Carbide PEEK Composites
by: Yin Wu, et al.
Published: (2020-05-01)

Energy absorption and self-sensing performance of 3D printed CF/PEEK cellular composites
by: J. Jefferson Andrew, et al.
Published: (2021-10-01)

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications
by: Xingting Han, et al.
Published: (2019-02-01)

Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application
by: Philipp Honigmann, et al.
Published: (2018-01-01)

In-Hospital 3D Printed Scaphoid Prosthesis Using Medical-Grade Polyetheretherketone (PEEK) Biomaterial
by: Philipp Honigmann, et al.
Published: (2021-01-01)

3D Printed Strontium and Zinc Doped Hydroxyapatite Loaded PEEK for Craniomaxillofacial Implants
by: Azhar, U., et al.
Published: (2022)

3D printing of high performance polymer-bonded PEEK-NdFeB magnetic composite materials
by: L. Pigliaru, et al.
Published: (2020-05-01)

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
by: Wenzheng Wu, et al.
Published: (2015-09-01)

The Fabrication of Organic Thin Film Transistor on Plastic Substrate by Inkjet-printing Technology
by: Min-Hua Yang, et al.
Published: (2005)

The Surface Characterisation of Fused Filament Fabricated (FFF) 3D Printed PEEK/Hydroxyapatite Composites
by: Krzysztof Rodzeń, et al.
Published: (2021-09-01)

3D Printed Antibacterial Prostheses
by: Jorge M. Zuniga
Published: (2018-09-01)

Design Optimization and FE Analysis of 3D Printed Carbon PEEK Based Mono Leaf Spring
by: Amir Kessentini, et al.
Published: (2019-04-01)

Quantitative Assessment of Point-of-Care 3D-Printed Patient-Specific Polyetheretherketone (PEEK) Cranial Implants
by: Neha Sharma, et al.
Published: (2021-08-01)

Fabrication of Mg Coating on PEEK and Antibacterial Evaluation for Bone Application
by: Yang Ji, et al.
Published: (2021-08-01)

The Direct 3D Printing of Functional PEEK/Hydroxyapatite Composites via a Fused Filament Fabrication Approach
by: Krzysztof Rodzeń, et al.
Published: (2021-02-01)

Quality Characteristics and Clinical Relevance of In-House 3D-Printed Customized Polyetheretherketone (PEEK) Implants for Craniofacial Reconstruction
by: Neha Sharma, et al.
Published: (2020-08-01)

Mechanical, Chemical, and Processing Properties of Specimens Manufactured from Poly-Ether-Ether-Ketone (PEEK) Using 3D Printing
by: Maciej Mrówka, et al.
Published: (2021-05-01)

Bimetallic ions regulated PEEK of bone implantation for antibacterial and osteogenic activities
by: Lei Wang, et al.
Published: (2021-12-01)

3D-Printed PEEK Extravascular Stent in the Treatment of Nutcracker Syndrome: Imaging Evaluation and Short-Term Clinical Outcome
by: Dali He, et al.
Published: (2020-07-01)

Application of 3D-printed PEEK scapula prosthesis in the treatment of scapular benign fibrous histiocytoma: A case report
by: Dong Liu, et al.
Published: (2018-09-01)

An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants
by: Xingting Han, et al.
Published: (2019-05-01)

Tensile and Bending Strength Improvements in PEEK Parts Using Fused Deposition Modelling 3D Printing Considering Multi-Factor Coupling
by: Yao Li, et al.
Published: (2020-10-01)

Enhancing antibacterial capability and osseointegration of polyetheretherketone (PEEK) implants by dual-functional surface modification
by: Chengzhe Gao, et al.
Published: (2021-07-01)

A Research on Mechanical Properties Improvement and Surface Modification of PEEK Models Printed by Fused Deposition Modeling Technology
by: Po-Lun Wu, et al.
Published: (2019)

Preparation of 3D printed silver nanocomposites and their antibacterial properties
by: Zhu Chunli, et al.
Published: (2021-01-01)

The still existence: To peek time in a gap
by: TSAI,WAN-SHIN, et al.
Published: (2017)

Peek-A-Boo
by: Min-Yi Yang, et al.
Published: (2016)

Integrating Optimal Design and Inkjet Printing Technologies in the Development of a Light Guide Plate
by: Min-Yen Tsai, et al.
Published: (2013)

The Printing Technology used in Soft Substrate Surface Metallization
by: Tsung-Han, Li, et al.
Published: (2013)

Fabrication and Characterization on High Performance Mg/Carbon-Fiber/PEEK Laminates and Nanoparticle/PEEK Nanocomposites
by: Mu-Cheng Kuo, et al.
Published: (2005)

On Inkjet Printing Technology for Flexible Substrate
by: Che-Hao Wu, et al.
Published: (2010)

TiO<sub>2</sub> and PEEK Reinforced 3D Printing PMMA Composite Resin for Dental Denture Base Applications
by: Sheng-Gui Chen, et al.
Published: (2019-07-01)

A Multi-Criteria Assessment Strategy for 3D Printed Porous Polyetheretherketone (PEEK) Patient-Specific Implants for Orbital Wall Reconstruction
by: Neha Sharma, et al.
Published: (2021-08-01)

A Study on Plasma Spray of Hydroxyapatite (HA) Coating on Polyetheretherketone (PEEK) Substrate.
by: Hsiao Wei-Tien, et al.
Published: (2001)

3D Printing Technologies
Published: (2022)

Evaluate the Mineralization of Osteoprogenitor Cells on Surface Modified PEEK Grafting Different Proteins
by: CHEN, CHIH-HUA, et al.
Published: (2017)

Biocompatibility and surface modifications of peek and peek/carbon fibre composites
by: Smith, Sarah Ruth
Published: (1990)

Surface bioactivation of PEEK by neutral atom beam technology
by: Joseph Khoury, et al.
Published: (2019-12-01)

Strategizing the 3D Printing Technology in the Artificial Orthopedics
by: Hsu, Wen-Hua, et al.
Published: (2016)