Fabrication of electrospinning fibers for Zinc-air battery and Fuel cell
碩士 === 國立中正大學 === 化學工程研究所 === 106 === First part of this study is the formation of the gas diffusion layer (GDL) by electrospinning for zinc-air battery. Double solvent system in electrospinning process was employed to increasing the roughness of fiber. A series of polystyrene (PS) fibers mat and ca...
Main Authors: | LUO, YI-CHENG, 羅翊誠 |
---|---|
Other Authors: | LI, YUAN-YAO |
Format: | Others |
Language: | zh-TW |
Published: |
2018
|
Online Access: | http://ndltd.ncl.edu.tw/handle/wetxce |
Similar Items
-
Fabrication of MnO2/Conductive Polymer Fiber by Electrospinning as Air Cathode for Rechargeable Zinc-Air Battery
by: Chen-Yi Yen, et al.
Published: (2015) -
Fabrication of Electrospinning Nanofibers and Preparation of CO2 Adsorption Membrane for Zinc-air Battery Application
by: JU, YAO-TING, et al.
Published: (2016) -
Research and development of zinc air fuel cell battery
by: Wu, Yao Tso, et al.
Published: (2012) -
Fabrication of Beltlike Fibers by Electrospinning
by: Yan-Qing Liu, et al.
Published: (2018-09-01) -
Fabrication of Cathode with Nanomaterials for Zinc–Air Fuel Cell
by: Yu-jia Tsau, et al.
Published: (2007)