The High Temperature Charge-Discharge Characteristics of 2D Coating and 3D Additive Manufacturing on Mg-Ni Anode Materials

The High Temperature Charge-Discharge Characteristics of 2D Coating and 3D Additive Manufacturing on Mg-Ni Anode Materials

碩士 === 國立成功大學 === 材料科學及工程學系 === 105

Bibliographic Details
Main Authors:	HUEY-PYNGTAN, 陳慧萍
Other Authors:	Fei-Yi Hung
Format:	Others
Language:	zh-TW
Published:	2017
Online Access:	http://ndltd.ncl.edu.tw/handle/89yn3k

Similar Items

Microstructures and Charge-Discharge Characteristics of Magnesium Film Anodes Produced by 3D Laser Additive Manufacturing and Thermal Evaporation
by: Jia-ZhengHong, et al.
Published: (2016)

A Study on Microstructures and Charge-Discharge Characteristics of Mg-Ni-C Anode Materials for Lithium-Ion Rechargeable Batteries
by: JEN-HSUANHSIAO, et al.
Published: (2011)

Effects of Adding Ca, Zr and Zn on Microstructure and Charge-Discharge Characteristics of Mg Alloy Anode Materials
by: Pei-YaoKao, et al.
Published: (2019)

Improvement of Charge-Discharge Characteristics of the Mg-Ni Powder Electrodes at 55°C
by: Kuan-Jen Chen, et al.
Published: (2013-01-01)

Relaxation Analysis of Graphite Anode Materials after Charge-Discharge Cycles
by: Shigeomi TAKAI, et al.
Published: (2020-09-01)

Effect of Adding Ag on Charge-Discharge Characteristics and Interface Analysis of Mg Alloy Anode Materials for Lithium-Ion Rechargeable Batteries
by: Tung-HsuanHsiao, et al.
Published: (2012)

Corrosion and Discharge Behaviors of Mg-Al-Zn and Mg-Al-Zn-In Alloys as Anode Materials
by: Jiarun Li, et al.
Published: (2016-03-01)

Influence of Zr Addition on Structure and Performance of Rare Earth Mg-Based Alloys as Anodes in Ni/MH Battery
by: Shujun Qiu, et al.
Published: (2015-04-01)

Additively Manufactured Coatings
by: Pankaj Kumar, et al.
Published: (2021-05-01)

Additively Manufactured Coatings
Published: (2021)

Improving insulation and thermal conductivity of anodic coating by plasma discharge treatment
by: Song Wei, et al.
Published: (2021-02-01)

Fabrication and Charge-Discharge Properties of Ni/MH Battery
by: Sue-Fen,Cheng, et al.
Published: (2000)

Electroless Ni-based Alloy as Anode Coating Material for Direct Methanol Fuel Cell
by: Che-Yu Lin, et al.
Published: (2008)

Enhancement of charging and discharging rates for partially insulated MgB2 magnets composed of Cr-coated MgB2 superconducting wires
by: Y.G. Kim, et al.
Published: (2019-12-01)

Effects of sintering temperature on performance of Ni/YSZ anodes
by: Jing-Run Wei, et al.
Published: (2007)

Low‐temperature synthesis of graphitic carbon‐coated silicon anode materials
by: Zheng Yan, et al.
Published: (2019-12-01)

The manufacture and testing of anode supported Ni-10Sc1CeSZ SOFCs for intermediate temperature operation
by: McDonald, Nikkia M.
Published: (2017)

Enhance its Corrosion Behavior of Additively Manufactured NiTi by Micro-Arc Oxidation Coating
by: Dehghanghadikolaei, Amir
Published: (2018)

Characterization of Ni–P coating on AZ91D magnesium alloy with surfactants and nano-additives
by: Mohammed Sahal
Published: (2014-12-01)

Additively Manufactured NiTi and NiTiHf Alloys: Estimating Service Life in High-Temperature Oxidation
by: Hediyeh Dabbaghi, et al.
Published: (2020-05-01)

Long-Term Testing of WC–Ni–Fe Coating as an Inert Anode in a Low-Temperature Electrolyte for Aluminum Production
by: Chuhua LIU, et al.
Published: (2019-12-01)

Development of Bioimplants with 2D, 3D, and 4D Additive Manufacturing Materials
by: Guo Liu, et al.
Published: (2020-11-01)

Evaluation of the corrosion resistance of a Ni-P coating deposited on additive manufacturing steel: A dataset
by: Dayi Gilberto Agredo Diaz, et al.
Published: (2020-10-01)

Carbon coated Using Glucose solutions and Additives on Graphite as Anode Materials for Lithium-ion Batteries
by: CHEN, CHING-YUNG, et al.
Published: (2017)

3D thixo-printing: A novel approach for additive manufacturing of biodegradable Mg-Zn alloys
by: Dalton Daniel Lima, et al.
Published: (2020-11-01)

Electrospinning synthesis of 3D porous NiO nanorods as anode material for lithium-ion batteries
by: Wei Kong Xiang, et al.
Published: (2016-06-01)

Discharge Characterization and Zinc Anode Recovery of Zinc-Air Battery
by: Hui-Wen Cheng, et al.
Published: (2001)

Development of Sustainable Cold Spray Coatings and 3D Additive Manufacturing Components for Repair/Manufacturing Applications: A Critical Review
by: Sunil Pathak, et al.
Published: (2017-08-01)

Enhancement of osteoblast activity on nanostructured NiTi/hydroxyapatite coatings on additive manufactured NiTi metal implants by nanosecond pulsed laser sintering
by: Deng B, et al.
Published: (2018-11-01)

A corrosion resistant die-cast Mg-9Al-1Zn anode with superior discharge performance for Mg-air battery
by: Bo Xiao, et al.
Published: (2020-09-01)

ELECTROCHEMICAL CHARGE-DISCHARGE PROPERTIES OF Ti2Ni-BASED HYDIRDE ELECTRODES
by: Chiou, Shyue Liang, et al.
Published: (1993)

Effect of LaNi5 additions on electrode properties of Mg2Ni alloys
by: Hsien-Chung Hu, et al.
Published: (2011)

The Manufacture of Large Area Colored Anodic Coating on Hop Dip Galvanized Steel
by: 石富勻
Published: (1997)

Effect of Ni and Cu Additive on Electromigration in Sn Solder Joints and Lines
by: Huey-Tyng Chiew, et al.
Published: (2004)

Magnesiophilic Interface of 3D MoSe2 for Reduced Mg Anode Overpotential
by: Tong Shen, et al.
Published: (2020-06-01)

The evolution of microstructure and mechanical properties at elevated temperature of cast Al–Li–Cu–Mg alloys with Ni addition
by: Xuejian Zhang, et al.
Published: (2020-09-01)

Effect of Er Addition on the High Temperature Strength of Al-Si-Cu-Ni-Mg-Fe Piston Alloys
by: Xianfeng LI, et al.
Published: (2019-06-01)

Preparation of LiNiO2 Using Fluorine-modified NiO and Its Charge-discharge Properties
by: Mikio HATA, et al.
Published: (2021-05-01)

Wire Arc Additive Manufacturing of Al-Mg Alloy with the Addition of Scandium and Zirconium
by: Taisiya Ponomareva, et al.
Published: (2021-06-01)

Ambient-Temperature Indentation Creep of Shape Memory NiTi Alloys: Additively Manufactured versus Cast
by: Md. Minhazul Islam, et al.
Published: (2021-08-01)