Light-Weight Steel Buildings Destruction Pattern Analysis

• Main Authors: LI,CHO-YUAN, 李卓遠
• Other Authors: SHEN, MAO-SUNG
• Format: Others
• Language: zh-TW
• Published: 2017
• Online Access: http://ndltd.ncl.edu.tw/handle/gt53eg

碩士 === 國立高雄應用科技大學 === 土木工程與防災科技研究所 === 105 === Light-Weight of Steel Buildings , Due to the demanding of rapid completion and using gadgets for the constructions were made to simplify and constructing on a short periods of time. The majority of the beam and column of joints structures system did not comply with the structural mechanics designing and proper constructing methods. Under the phenomenon experiences from Typhoons and Earthquakes on a several attacked, The buildings can be repeated and that can occur into the beam and column’s on joints damages, Therefore, The whole structured will became stressed and weak, That could be the results of a Plastic Deformation and responsibility on a caused of building damages and lucked of strength structures , however , those destruction of Light-Weight of Steel Buildings would occur everywhere flying with endless stream of events. On this researched, It will be focus from 3 cases analysis of the possible damages caused in which simulated analysis from the destruction pattern (Axial force, bending moment) by SAP 2000 construction software . Those failure modes are the steel structures always display into the beam and column's joints. In this study, By simply adding the technology technique in every building structures using the “SAP2000 Construction Software”, help for a proper improvement on the sub-structures reinforcement of force loading behavior that can proof a good result and work satisfactions.