Study on microstructure and mechanical properties of plating metal film on ABS plastic surface
碩士 === 東南科技大學 === 機械工程研究所 === 104 === This study is plating metal film on plastic by micro-electroplating machine. Acrylonitrile and Butadiene and Styrene copolymer (Acrylonitrile Butadiene Styrene is short for ABS) conductive layer on ABS test chip by chemical treatment. Plating nickel metal film i...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2016
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/31916437155380580717 |
| Summary: | 碩士 === 東南科技大學 === 機械工程研究所 === 104 === This study is plating metal film on plastic by micro-electroplating machine. Acrylonitrile and Butadiene and Styrene copolymer (Acrylonitrile Butadiene Styrene is short for ABS) conductive layer on ABS test chip by chemical treatment. Plating nickel metal film is controlled by DC Power Supply. Adjust the parameter settings to different sensitization treatment time, different the temperature of the plating solution and control current magnitude and time will change nickel deposition rate and extremely sensitized time. Due to different deposition rate of the Nickel ions affect metal plating surface microstructure. Analysis surface and section by scanning electron microscope (SEM).Analysis mechanical properties of the metal film by surface coarseness profiling instrument. Finally, according to the results and the performance test, recommend parameters optimization of the ABS plastic plating Nickel.
|
|---|