Microwave-Enhanced Pyrolysis ofWaste Printed Circuit Board

Microwave-Enhanced Pyrolysis ofWaste Printed Circuit Board

碩士 === 國立臺灣大學 === 環境工程學研究所 === 104 === The concentration of gold in waste printed circuit board （WPCB） used in this study can be up to 20 ppmw, whereas it is only 0.5 ppmw in the gold ore. Moreover, it also contains other precious metals such as silver, platinum, and palladium. Therefore, as one of...

Full description

Bibliographic Details
Main Authors:	Meng-Wei Pan, 潘孟暐
Other Authors:	Shang-Lien Lo
Format:	Others
Language:	zh-TW
Published:	2016
Online Access:	http://ndltd.ncl.edu.tw/handle/40845732899575044768

Similar Items

Precious Metals Recovery from Waste Printed Circuit Board Using Microwave Pyrolysis
by: Szu-Ling Chou, et al.
Published: (2017)

Study on recycling of waste printed circuit board by microwave pyrolysis and its potential pollution.
by: Lan, Chen-Laun, et al.
Published: (2019)

Kinetic Study of the Pyrolysis of Waste Printed Circuit Boards Subject to Conventional and Microwave Heating
by: Chunyuan Ma, et al.
Published: (2012-08-01)

The Catalytic Studies of Pyrolysis of Printed Circuit Board
by: Hung-Da Fang, et al.
Published: (2001)

REMOVAL OF HEAVY METALS BYACTIVATED CARBON OFWASTE MATERIALS
by: Vaibhav R. Dhawale, et al.
Published: (2017-07-01)

Study on the Pyrolysis of Plastic and Printed Circuit Board of Waste Mobile Phones adding Reactants
by: YE,R-HAU, et al.
Published: (2014)

CHARACTERIZATION OFWASTE BIOMASS FROM GREENHOUSE ROSE CULTIVATION AND PACKAGING
by: Giovanni Cascone, et al.
Published: (2010-06-01)

Catalytic Pyrolysis and a Pyrolysis Kinetic Study of Shredded Printed Circuit Board for Fuel Recovery
by: Salmiaton Ali, et al.
Published: (2014-10-01)

Treatment and Recovery of Waste Printed Circuit Boards
by: Goan, Gwo-Guang, et al.
Published: (1999)

Microwave assisted leaching and electrochemical recovery of copper from printed circuit boards of computer waste
by: Ivănuş R.C., et al.
Published: (2010-06-01)

Microwave pyrolysis of forestry waste
by: Al Sayegh, Hassan
Published: (2012)

The Investigation of Recovery Process for Printed Circuit Board Wastes
by: Chu, Shun Chang, et al.
Published: (1994)

Feasibility Studies for Recycling of Printed Circuit Board Wastes
by: Yi-Chi Chien, et al.
Published: (1995)

WASTE PRINTED CIRCUIT BOARDS SEPARATION IN ELECTROSTATIC SEPARATOR
by: Branimir Fuk
Published: (2012-12-01)

Composites Based on Waste Printed Circuit Boards (WPCB) and Waste Polypropylene
by: Elena Ramona Andrei, et al.
Published: (2019-10-01)

Microwave-Induced Pyrolysis of Biomass Waste
by: Yu-Fong Huang, et al.
Published: (2010)

Microwave induced pyrolysis of plastic wastes
by: Ludlow-Palafox, Carlos
Published: (2002)

A study on the waste minimization for printed circuit board manufacture.
by: Wang, C.J, et al.
Published: (1993)

Hydrometallurgical Treatment of Waste Printed Circuit Boards: Bromine Leaching
by: Hao Cui, et al.
Published: (2020-04-01)

Extraction of Copper and Zinc from Waste Printed Circuit Boards
by: Ayorinde Emmanuel Ajiboye, et al.
Published: (2019-08-01)

Evaluation of US EPA Method 3052 Microwave Acid Digestion for Quantification of Majority Metals in Waste Printed Circuit Boards
by: Dagmar Remeteiová, et al.
Published: (2020-11-01)

An investigation on the chemical and microwave-assisted approaches for the reclamation of metallic values from computer printed circuit boards (PCB) wastes
by: Offeh Gyimah, Kwabena
Published: (2018)

TRL-based Measurement of Embedded Circuits in Microwave Printed Circuit Boards Including Frequency Conversion
by: P. Ourednik, et al.
Published: (2018-12-01)

Recovery of Gold from Waste Liquid of Printed Circuit BoardIndustry
by: Hua-hsiang Hsu, et al.
Published: (2008)

Electrolysis of Silver-Containing Waste Liquid in the Printed Circuit Board Industry
by: Hsu Tzu-Yuan, et al.
Published: (2015)

Enhancement of Cementation Processes Treating Copper-Bearing Wastes from Medical Electronics Printed Circuit Board
by: Lin,Chien-Kuang, et al.
Published: (2016)

Evaluation of Recyclability and Recycling Efficiency of Metals for Waste Printed Circuit Boards
by: Le, Hoang-Long
Published: (2014)

Determining Metal Content in Waste Printed Circuit Boards and their Electronic Components
by: Aleksandra Anić Vučinić, et al.
Published: (2020-09-01)

Optimization Studies on Recovery of Metals from Printed Circuit Board Waste
by: P. Sivakumar, et al.
Published: (2018-01-01)

Effect of Graphite on Copper Bioleaching from Waste Printed Circuit Boards
by: Linlin Tong, et al.
Published: (2020-01-01)

Novel waste printed circuit board recycling process with molten salt
by: Frank Riedewald, et al.
Published: (2015-01-01)

Analysis of Gaseous Products in Treatment and Recovery of Waste Printed Circuit Boards by Molten Slat
by: wei-hsin Li, et al.
Published: (2000)

Optimal Processing Parameters for Micro Drilling on the Electrical Test Fixture of Printed Circuit Boards
by: Chung-Yung Pan, et al.

Effects of DK and PIM by Printed Circuit Board Material Section on Printed Circuit Board Antenna
by: Tsung-Ta Wu, et al.
Published: (2018)

An Enhanced Random Vibration and Fatigue Model for Printed Circuit Boards
by: Bruno de Castro Braz, et al.

Ultrasound-Augmented Leaching of Precious Metals from Waste Printed Circuit Boards
by: U-Cheong Cheong, et al.
Published: (2018)

Optimal Cost of Decision Model for Printed Circuit Board Waste Solution of Recovery
by: Ming-Hui Chang, et al.
Published: (2007)

Waste printed circuit board non-metallic composition resources in the cement concrete
by: Jian-an Chen, et al.
Published: (2012)

The adsorption of heavy metals by different chemical modified waste printed circuit board
by: Yin-chih Pu, et al.
Published: (2015)

The Investigationt of Manufacturing Polymeric Composites From Recycled Printed Circuit Board Waste
by: S. H. Su, et al.

Cannot write session to /tmp/vufind_sessions/sess_6d9ha70mj4trlv2emuekmrtpiu