The study of work hardening and wire drawing

• Main Authors: CHU,YU-CHEN, 朱昱丞
• Other Authors: CHEN,DA-CHIH
• Format: Others
• Language: zh-TW
• Published: 2016
• Online Access: http://ndltd.ncl.edu.tw/handle/70403882903748293267

碩士 === 國立宜蘭大學 === 機械與機電工程學系碩士班 === 104 === This study is research of the OFC(Oxygen-free copper).Use different heating temperature and holding time for heat treatment to the wire to find out more suitable heat treating parameter combinations which can reduce more drawing load. The original wire diameter is ∅1mm. After 13 passes of single-die extension the wire diameter becomes ∅0.1mm. It will be easily letting the wire be broken if continue drawing the wire. In order to avoid this situation, we take heat treating to the wire. Use different heat treating parameter to find out which combination can reduce the residual stress in the wire. Improve the success rate of wire drawing when the wire diameter less than ∅0.1mm. In this study it is found that 250℃ heating temperature and holding three hours can reduce the most drawing load, these data will be reference for wire drawing in the future.