The fabrication of micro-truncated cone arrays and its properties.
碩士 === 國立東華大學 === 材料科學與工程學系 === 104 === In this study, we combined photolithography, polydimethylsiloxane (PDMS) molding, and UV-forming techniques to fabricate micro-truncated cone arrays on PET films. Three different experimental methods had been proposed in this paper. In the first and second par...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Published: |
2016
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/95328830719022624057 |
| Summary: | 碩士 === 國立東華大學 === 材料科學與工程學系 === 104 === In this study, we combined photolithography, polydimethylsiloxane (PDMS) molding, and UV-forming techniques to fabricate micro-truncated cone arrays on PET films.
Three different experimental methods had been proposed in this paper. In the first and second parts, we changed softbake parameters and exposure doses during photolithography to adjust the sidewall angle of the micro-truncated cone arrays. And the height of micro-truncated cone arrays was adjusted by changing the parameter of spin coating in the third part of this study. Then the influences of sidewall angle, fill factor and height of micro-truncated cone arrays on efficiency improvement and optical properties of a blue light organic light-emitting diode (OLED) were investigated.
|
|---|