none
碩士 === 國立中央大學 === 光機電工程研究所 === 104 === In this study, the molding simulation software (Moldex3D) is utilized to investigate the impacts of molding parameters on the warp of liquid silicone lens. Taguchi method is employed as a design of experiment, which can be used to discuss the influence of vario...
Main Authors: | , |
---|---|
Other Authors: | |
Format: | Others |
Language: | zh-TW |
Published: |
2016
|
Online Access: | http://ndltd.ncl.edu.tw/handle/00684803525680787818 |
id |
ndltd-TW-104NCU05651117 |
---|---|
record_format |
oai_dc |
spelling |
ndltd-TW-104NCU056511172017-06-10T04:46:59Z http://ndltd.ncl.edu.tw/handle/00684803525680787818 none 運用模流分析軟體搭配田口方法探討液態矽膠射出成型製程參數之研究 Sheng-Chiang Lin 林聖強 碩士 國立中央大學 光機電工程研究所 104 In this study, the molding simulation software (Moldex3D) is utilized to investigate the impacts of molding parameters on the warp of liquid silicone lens. Taguchi method is employed as a design of experiment, which can be used to discuss the influence of various parameters. And then confirms the importance of significant factors and its confidence level through analysis of variance (ANOVA). Two types of orthogonal array (L8(27), L9(34)) are adopted in this research, the injection rate, temperature of heating rod, melt temperature, heating time, gate size, packing pressure, thermal conductivity and product thickness are served as the control factors. Notice that only parts of factors are included in experiments related to Taguchi method. The experiments in orthogonal array L8(27) are first conducted with wider range of parameter value to understand their influences on quality, which demonstrate the significant interactions between injection rate and melt temperature. Then, in order to find an optimal set of molding parameters, relatively narrower range of parameter values are adopted in the experiments of orthogonal array L9(34). Through a series of simulation, the results reveal that packing pressure is the most important factor and followed the temperature of heating rod and melt temperature, the injection rate has the lowest impact. In ANOVA, the outputs of experiment always lie in the confident interval with 99% confident level. Chi-Feng Chen 陳奇夆 2016 學位論文 ; thesis 75 zh-TW |
collection |
NDLTD |
language |
zh-TW |
format |
Others
|
sources |
NDLTD |
description |
碩士 === 國立中央大學 === 光機電工程研究所 === 104 === In this study, the molding simulation software (Moldex3D) is utilized to investigate the impacts of molding parameters on the warp of liquid silicone lens. Taguchi method is employed as a design of experiment, which can be used to discuss the influence of various parameters. And then confirms the importance of significant factors and its confidence level through analysis of variance (ANOVA).
Two types of orthogonal array (L8(27), L9(34)) are adopted in this research, the injection rate, temperature of heating rod, melt temperature, heating time, gate size, packing pressure, thermal conductivity and product thickness are served as the control factors. Notice that only parts of factors are included in experiments related to Taguchi method. The experiments in orthogonal array L8(27) are first conducted with wider range of parameter value to understand their influences on quality, which demonstrate the significant interactions between injection rate and melt temperature. Then, in order to find an optimal set of molding parameters, relatively narrower range of parameter values are adopted in the experiments of orthogonal array L9(34).
Through a series of simulation, the results reveal that packing pressure is the most important factor and followed the temperature of heating rod and melt temperature, the injection rate has the lowest impact. In ANOVA, the outputs of experiment always lie in the confident interval with 99% confident level.
|
author2 |
Chi-Feng Chen |
author_facet |
Chi-Feng Chen Sheng-Chiang Lin 林聖強 |
author |
Sheng-Chiang Lin 林聖強 |
spellingShingle |
Sheng-Chiang Lin 林聖強 none |
author_sort |
Sheng-Chiang Lin |
title |
none |
title_short |
none |
title_full |
none |
title_fullStr |
none |
title_full_unstemmed |
none |
title_sort |
none |
publishDate |
2016 |
url |
http://ndltd.ncl.edu.tw/handle/00684803525680787818 |
work_keys_str_mv |
AT shengchianglin none AT línshèngqiáng none AT shengchianglin yùnyòngmóliúfēnxīruǎntǐdāpèitiánkǒufāngfǎtàntǎoyètàixìjiāoshèchūchéngxíngzhìchéngcānshùzhīyánjiū AT línshèngqiáng yùnyòngmóliúfēnxīruǎntǐdāpèitiánkǒufāngfǎtàntǎoyètàixìjiāoshèchūchéngxíngzhìchéngcānshùzhīyánjiū |
_version_ |
1718457794521202688 |