Numerical Simulation and Experimental Comparison on Single Track of Selective Laser Melting Process

Numerical Simulation and Experimental Comparison on Single Track of Selective Laser Melting Process

碩士 === 國立交通大學 === 機械工程系所 === 104 === In this thesis, effects of the processing parameters such as laser power and scanning speed on single molten tracks formed are investigated during the selective laser melting (SLM) Process. The simulation results solved from commercial finite element software (AN...

Full description

Bibliographic Details
Main Authors:	Liou, Yao-Wen, 劉耀文
Other Authors:	Cheng, Chung-Wei
Format:	Others
Language:	zh-TW
Published:	2016
Online Access:	http://ndltd.ncl.edu.tw/handle/80147820061682144820

Similar Items

Numerical Investigation of Thermo-Mechanical Field during Selective Laser Melting Process with Experimental Validation
by: Lan Li, et al.
Published: (2021-06-01)

Numerical Simulation of Solidification and microstructure for Zone-melting and Selective Laser Melting Process
by: Wei-ChihChen, et al.
Published: (2015)

The Study of H13 Single Track using Selective Laser Melting process
by: Ying-XianLi, et al.
Published: (2017)

Optical diagnostics of selective laser melting and monitoring of single-track formation
by: Gusarov Andrey, et al.
Published: (2017-01-01)

Numerical Modeling of Surface Morphology and Melt Pool Behavior in Selective Laser Melting and Experimental Validation
by: Yu-CheWu, et al.
Published: (2018)

Numerical Simulation of Melt Spinning Process of Profile-Conjugated Fibers
by: Yao-Hung Huang 黃耀弘, et al.
Published: (2012)

Optimization in Process Parameters on Double Track of Selective Laser Melting
by: Bung-YoLiu, et al.
Published: (2018)

Numerical Model Establishment and Neural Network Process Optimization for Simulated Selective Laser Melting Process
by: CHEN,KUAN-YU, et al.
Published: (2019)

Analysis and validation of volume energy density effect on single track in selective laser melting
by: TSAI, HAN-YUN, et al.
Published: (2019)

Microstructural and thermal stability of selective laser melted 316L stainless steel single tracks
by: Krakhmalev, P., et al.
Published: (2017-05-01)

Differences in microstructure and nano-hardness of selective laser melted Inconel 718 single tracks under various melting modes of molten pool
by: Hongying Wang, et al.
Published: (2020-09-01)

Formation of SS316L Single Tracks in Micro Selective Laser Melting: Surface, Geometry, and Defects
by: Zhiheng Hu, et al.
Published: (2019-01-01)

Numerical-Experimental Study of the Consolidation Phenomenon in the Selective Laser Melting Process with a Thermo-Fluidic Coupled Model
by: Francisco Cordovilla, et al.
Published: (2018-08-01)

The comparison of experimental data with numerical simulation for the melt processing of polyethylene using a multi-pass rheometer
by: Lee, Karen
Published: (2001)

Selective Laser Melting process simulation of open lattice cellular materials
by: Lampeas George
Published: (2018-01-01)

Economic comparison of selective laser melting and conventional subtractive manufacturing processes
Published: ()

Single tracks data obtained by selective laser melting of Ti6Al4V with a small laser spot diameter
by: Emanuele Vaglio, et al.
Published: (2020-12-01)

Numerical Mesoscale Modelling of Microstructure Evolution during Selective Laser Melting
by: Tijan Mede, et al.
Published: (2020-06-01)

Experimental and Numerical Investigation for Simulation of Thermophysical Properties for Polypropylene 575 Polymer Melts in Single Screw Extruder
by: May M. Ismail, et al.
Published: (2018-12-01)

Numerical Analysis on Molten Pool of Stainless Steel 316L Metal Powder by Multi-track Scanning in Selective Laser Melting
by: Shou-HaoJiang, et al.
Published: (2018)

Experimental and Theoretical Investigation of Selective Laser Melted Uddeholm Dievar ®
by: Pepić, Sanjin, et al.
Published: (2019)

Peculiarities of single track formation from TI6AL4V alloy at different laser power densities by selective laser melting
by: Yadroitsava, I., et al.
Published: (2015-11-01)

Study on Finite Element Simulation and Experiment of Selective Laser Melting
by: Chen, Jyun-Ting, et al.
Published: (2019)

Simulation of microstructural evolution of selective laser melting of metal powders
by: Lopez Botello, Omar Eduardo
Published: (2016)

Simulation of dynamic characteristics of powder beds during selective laser melting process
by: CHOU, CHING-HSIANG, et al.
Published: (2019)

Numerical analysis of the effect of the scan strategy on the residual stress in the multi-laser selective laser melting
by: Sheng Zou, et al.
Published: (2020-03-01)

Simulation of the Evolution of Thermal Dynamics during Selective Laser Melting and Experimental Verification Using Online Monitoring
by: Peiying Bian, et al.
Published: (2020-08-01)

Selective Laser Melting of 316L Austenitic Stainless Steel: Detailed Process Understanding Using Multiphysics Simulation and Experimentation
by: Peyman Ansari, et al.
Published: (2021-07-01)

Evaluation of single tracks of 17-4PH steel manufactured at different power densities and scanning speeds by selective laser melting
by: Makoana, N. W., et al.
Published: (2016-11-01)

Investigations into process monitoring for selective laser melting
by: Ashton, I.
Published: (2016)

Selective Laser Re-melting
by: Chung, Sonia
Published: (2017)

Selective Laser Melting Process by Multi-beam Laser System
by: Tsai, Chun-Yu, et al.
Published: (2017)

Numerical investigation on heat transfer of multi-laser processing during selective laser melting of AlSi10Mg
by: Bin Liu, et al.
Published: (2019-03-01)

Comparison of Single Ti6Al4V Struts Made Using Selective Laser Melting and Electron Beam Melting Subject to Part Orientation
by: Volker Weißmann, et al.
Published: (2017-03-01)

A Comparison of Biocompatibility of a Titanium Alloy Fabricated by Electron Beam Melting and Selective Laser Melting.
by: Hong Wang, et al.
Published: (2016-01-01)

Comparison of Selective Laser Melted Titanium and Magnesium Implants Coated with PCL
by: Julia Matena, et al.
Published: (2015-06-01)

Model Support on Selective Laser Melting Manufacturing Method
by: Ming-WeiLiu, et al.
Published: (2015)

Effect of Hatch Spacing on Melt Pool and As-built Quality During Selective Laser Melting of Stainless Steel: Modeling and Experimental Approaches
by: Zhichao Dong, et al.
Published: (2018-12-01)

Investigation and development of the numerical simulation for powder melting phenomenon during the laser additive layer manufacturing process
by: Shin-Shian Lin, et al.
Published: (2015)

Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer
by: Qiyang He, et al.
Published: (2020-11-01)