| Summary: | 碩士 === 義守大學 === 電機工程學系 === 104 === The paper will utilize the power line carrier to establish a synchronized measurement system. The system includes a host computer, an electrical detection module, a speed detection module, and a control module. The host computer uses the LabVIEW graphical interface is complete the operation screen. Via LabVIEW graphical panel of the computer screen. Besides synchronizing the system, the host computer can command to the control module to operate the electrical equipment, can collect measured waveforms from detection modules, and can analyze these data. The host computer can send out a synchronization signal, which can be received by the detector and controller. The synchronization of the whole system can be reached. The detection modules are digital signal recorder, which can monitor realtime waveforms and send them to the host computer.Electrical-signal detectors can measure voltage and current waveforms. Speed detector can measure the speed waveform. The control module receives the command of the host computer via power line carrier,and control electrical equipment.
|
|---|
