Application of Abrasion Resistance Materials for the Surface Layer of Dam

Application of Abrasion Resistance Materials for the Surface Layer of Dam

碩士 === 國立嘉義大學 === 土木與水資源工程學系研究所 === 103

Bibliographic Details
Main Authors:	Yi-Jia Kao, 高顗傑
Other Authors:	Yu-Wen Liu
Language:	zh-TW
Online Access:	http://ndltd.ncl.edu.tw/handle/76880560633765584209

Similar Items

Application of Polyurea Materials on Abrasion Layer of Water Tunnel
by: Fang,Yu-Sen, et al.
Published: (2018)

Underwater Abrasion Resistance of Cementitious Acrylic Coating on Repaired Surface of Concrete Dam and Stilling Basin
by: Šušteršič Jakob, et al.
Published: (2018-01-01)

Abrasion Resistance of Materials
Published: (2012)

Evaluation of the properties and structure of nanocrystalline surface layers in relation to selected constructional materials resistant to abrasive wear
by: Jacek Górka, et al.
Published: (2018-09-01)

Formation of surface layer quality under abrasive treatment of polymer-composite materials
by: M. A. Tamarkin, et al.
Published: (2020-10-01)

Usage of abrasion-resistant materials in agriculture
by: J Votava
Published: (2014-06-01)

Glass-Ceramics as Abrasion-Resistant Materials
by: Robson, B.
Published: (1973)

Abrasion Resistance of Cementitions Materials Subjected to Blastsand
by: Lin, Shun Yuan, et al.
Published: (1995)

Abrasion resistance of IV-RCC used to construct spillway concrete steps of South African dams
by: Poyo, Myezo
Published: (2019)

Abrasive Erosion of the Surface Layer of Sluiceway & Spillway and the Repair Methodology
by: Chen,Tsen-Chin, et al.
Published: (2005)

Hydraulic Abrasion-Resistant Elastic Epoxy Resin Materials
by: Liqun Xu, et al.
Published: (2019-01-01)

Assessing the abrasive resistance of wood-based materials with fibreglass
by: Pavel Král, et al.
Published: (2008-01-01)

Investigation of the gouging abrasion resistance of materials in the mining industry
by: Tolfree, Donald
Published: (2009)

Deduction of Impact and Abrasion Damage Around the Spillway A Check Dam
by: Hann-Bin Lin, et al.
Published: (1994)

Wear Resistance of Piston Sleeve Made of Layered Material Structure: MMC A356R, Anti-Abrasion Layer and FGM Interface
by: Hernik Szymon
Published: (2016-09-01)

Effect of Pozzolanic Materials and fiber on the Abrasion-Erosion Resistance of Concrete
by: Jhong-Cheng Siao, et al.
Published: (2008)

Technology Politic in the Meinung Anti-Dam Movements
by: Chang Kao-chieh, et al.
Published: (2001)

Influence of chemical degradation and abrasion on surface properties of nanorestorative materials
by: Andréia Bolzan de Paula, et al.
Published: (2015-09-01)

Nonlinear mathematical modelling of process of abrasive deterioration of surfaces of materials
by: О.А. Вишневський, et al.
Published: (2005-01-01)

An Investigation of the Effects of Abrasive Machining on Surface Integrity of Brittle Materials
by: Yung-yuanLiao, et al.
Published: (2013)

Evaluating abrasive wear resistance of extruder tooling materials using the dry sand rubber wheel abrasion test
by: Halley, William G.
Published: (2014)

Abrasion resistance of concrete
by: Sadegzadeh, Massud
Published: (1985)

Homemade abrasion tester and its application for abrasion resistance testing of crease points on down fabrics
by: Yidie GUAN, et al.
Published: (2017-02-01)

Effect of Refractory Elements on Wear Intensity of the Surface Layers in the Abrasive Soil Mass
by: J. Napiórkowski, et al.
Published: (2013-09-01)

Halogen-Free Phosphonate Ionic Liquids as Precursors of Abrasion Resistant Surface Layers on AZ31B Magnesium Alloy
by: Tulia Espinosa, et al.
Published: (2015-01-01)

Image-Based Underwater Inspection System for Abrasion of Stilling Basin Slabs of Dam
by: Yonglong Li, et al.
Published: (2019-01-01)

Theoretical research on surface material migration of field constrained abrasive polishing
by: Yucheng Xue, et al.
Published: (2020-12-01)

Surface Analysis of Metal Materials After Water Jet Abrasive Machining
by: Pavel Polák, et al.
Published: (2015-01-01)

Research into the Disintegration of Abrasive Materials in the Abrasive Water Jet Machining Process
by: Andrzej Perec
Published: (2021-07-01)

Influence of Oversized Particles on Abrasions and Brittle Fractures of A Weir Surface Repair Layer
by: Chzuan-sz Wang, et al.
Published: (2011)

Study on Coating Abrasive Layer of Tool Steel Surface by Electrical Discharge Coating Technique
by: Cheng Kuang Fu, et al.
Published: (2012)

The abrasive wear of carbon materials
by: Eve, R. W.
Published: (1986)

The deformation of metallic surfaces by abrasion
by: Agarwala, Rajendra Prasad
Published: (1953)

Abrasion resistant coating on plastics
by: Ching-Ping Yang, et al.
Published: (2002)

Analysis of Kerf Surface Roughness in Abrasive Waterjet Cutting
by: Pan, Jia Tian, et al.
Published: (1995)

Effects of Electrolyte and Abrasive on Electrolyte Abrasive Polishing Characteristics of Pure Aluminum Surface
by: Kang-lin Peng, et al.
Published: (2018)

The application of surface insulating layer on wide-bandgap semiconductor devices
by: Chi-Joe Kao, et al.
Published: (2005)

Studying abrasive wear of materials for direct and indirect restorations with increased dental abrasion
by: A. M. Gimaletdinоva, et al.
Published: (2019-02-01)

Evaluation of Surface Microhardness and Abrasion Resistance of Two Dental Glass Ionomer Cement Materials after Radiant Heat Treatment
by: Dimitrios Dionysopoulos, et al.
Published: (2017-01-01)

The Effect of Magnetic Abrasive Finishing on the Flat Surface for Ferromagnetic and non-Ferromagnetic materials
by: Ali H Kadhum, et al.
Published: (2015-01-01)