| Summary: | 碩士 === 國立高雄應用科技大學 === 模具工程系 === 103 === This study uses ultrasonic detection to inspect the used area of the drive belt.The research procedure is through the Labview,a controller drives a scanning probe.After collecting signals from regions of used area,the measure data is then converted into graphical presentation of data using Matlab,PIA is then employed to provide a comparative analysis to provide a profile from 10% to 100% of used area.
This study has two kind of drive belt(A-belt & B-belt). From the result of the experiments measure data,the top of A-belt is easy worn ,the wear rate at the top of A-belt is 19.10%,others are between 14.77% and 16.88%. the wear of B-belt is more average then A-belt,the wear rate for B-belt is between 9.08% and 11.21% that is less than A-belt.If a measure data can replace with artificial, the belt can be accurate substituted for old belt and the reference for industries standard to make a new belt.
|
|---|
