Different Electromagnetic Structure Analysis for Power Transformer by using Finite Element Method : A Case Study

碩士 === 中原大學 === 工業與系統工程研究所 === 103 === This dissertation proposes experimental results for single-phase pad-mounted transformer in electromagnetic study with different multi-step lap joint core structure which is analyzed the magnetism priorities including core loss and vibration. When the transform...

Full description

Bibliographic Details
Main Authors: Meng-Hsueh Wu, 吳孟學
Other Authors: Chun-Yao Lee
Format: Others
Language:zh-TW
Published: 2015
Online Access:http://ndltd.ncl.edu.tw/handle/9692w2
id ndltd-TW-103CYCU5030061
record_format oai_dc
spelling ndltd-TW-103CYCU50300612019-05-15T22:08:26Z http://ndltd.ncl.edu.tw/handle/9692w2 Different Electromagnetic Structure Analysis for Power Transformer by using Finite Element Method : A Case Study 有限元素於不同電磁結構之研究:以變壓器為例 Meng-Hsueh Wu 吳孟學 碩士 中原大學 工業與系統工程研究所 103 This dissertation proposes experimental results for single-phase pad-mounted transformer in electromagnetic study with different multi-step lap joint core structure which is analyzed the magnetism priorities including core loss and vibration. When the transformer core was excited during power rating, the magnetic flux line has passed through the magnetic reluctance of the core, which effect of magnetic flux density on core insides, has been occurred. Basically, soft magnetic silicon steel material characteristic dependent on magnetostriction variation, which is affected to the internal core of magnetic flux density distribution. This dissertation is proposed correlation of multi-step lap’s core joint structures on single-phase distribution transformer, including magnetic flux density, magnetostrictive force, core loss and vibration, respectively. Core laminating length, air-gapped distance of core as well as air-gapped distribution, will be indispensable key point of magnetism characteristic. Firstly, this study presents a geometry model for multi-step lap core. Then, it also established Ansoft Maxwell 3D by using finite element method to analyze the electromagnetic model for each different core structures. Secondly, experimental approach for different core structure, including triangular-step, rectangular-step, oval-step, butt-lap -step and half mitre-lap-step, is used the finite element analysis to simulate electromagnetic properties which is observed different core joint structure dependent on each magnetic variation. It is indicated that a better core property with different joint structure has significantly validated. Consequently, for composited-core structure, is also has shown the results in lower magnetic vibration. Chun-Yao Lee 李俊耀 2015 學位論文 ; thesis 90 zh-TW
collection NDLTD
language zh-TW
format Others
sources NDLTD
description 碩士 === 中原大學 === 工業與系統工程研究所 === 103 === This dissertation proposes experimental results for single-phase pad-mounted transformer in electromagnetic study with different multi-step lap joint core structure which is analyzed the magnetism priorities including core loss and vibration. When the transformer core was excited during power rating, the magnetic flux line has passed through the magnetic reluctance of the core, which effect of magnetic flux density on core insides, has been occurred. Basically, soft magnetic silicon steel material characteristic dependent on magnetostriction variation, which is affected to the internal core of magnetic flux density distribution. This dissertation is proposed correlation of multi-step lap’s core joint structures on single-phase distribution transformer, including magnetic flux density, magnetostrictive force, core loss and vibration, respectively. Core laminating length, air-gapped distance of core as well as air-gapped distribution, will be indispensable key point of magnetism characteristic. Firstly, this study presents a geometry model for multi-step lap core. Then, it also established Ansoft Maxwell 3D by using finite element method to analyze the electromagnetic model for each different core structures. Secondly, experimental approach for different core structure, including triangular-step, rectangular-step, oval-step, butt-lap -step and half mitre-lap-step, is used the finite element analysis to simulate electromagnetic properties which is observed different core joint structure dependent on each magnetic variation. It is indicated that a better core property with different joint structure has significantly validated. Consequently, for composited-core structure, is also has shown the results in lower magnetic vibration.
author2 Chun-Yao Lee
author_facet Chun-Yao Lee
Meng-Hsueh Wu
吳孟學
author Meng-Hsueh Wu
吳孟學
spellingShingle Meng-Hsueh Wu
吳孟學
Different Electromagnetic Structure Analysis for Power Transformer by using Finite Element Method : A Case Study
author_sort Meng-Hsueh Wu
title Different Electromagnetic Structure Analysis for Power Transformer by using Finite Element Method : A Case Study
title_short Different Electromagnetic Structure Analysis for Power Transformer by using Finite Element Method : A Case Study
title_full Different Electromagnetic Structure Analysis for Power Transformer by using Finite Element Method : A Case Study
title_fullStr Different Electromagnetic Structure Analysis for Power Transformer by using Finite Element Method : A Case Study
title_full_unstemmed Different Electromagnetic Structure Analysis for Power Transformer by using Finite Element Method : A Case Study
title_sort different electromagnetic structure analysis for power transformer by using finite element method : a case study
publishDate 2015
url http://ndltd.ncl.edu.tw/handle/9692w2
work_keys_str_mv AT menghsuehwu differentelectromagneticstructureanalysisforpowertransformerbyusingfiniteelementmethodacasestudy
AT wúmèngxué differentelectromagneticstructureanalysisforpowertransformerbyusingfiniteelementmethodacasestudy
AT menghsuehwu yǒuxiànyuánsùyúbùtóngdiàncíjiégòuzhīyánjiūyǐbiànyāqìwèilì
AT wúmèngxué yǒuxiànyuánsùyúbùtóngdiàncíjiégòuzhīyánjiūyǐbiànyāqìwèilì
_version_ 1719126129567072256