Study of the tensile behavior of Cu- and Cr-C/Cu-coated Mg alloy(AZ61)

Study of the tensile behavior of Cu- and Cr-C/Cu-coated Mg alloy(AZ61)

碩士 === 長庚大學 === 機械工程學系 === 103

Bibliographic Details
Main Authors:	Cheng Han Li, 李政翰
Other Authors:	C. A. Huang
Format:	Others
Published:	2015
Online Access:	http://ndltd.ncl.edu.tw/handle/39757461749270833470

Similar Items

Tensile fracture behaviour of Cu- and Ni/Cu-coated Mg alloy (AZ61)
by: De Min Liu, et al.
Published: (2012)

Study of the tensile and fatigue properties of Cu, Ni/Cu, and Cr-C/Cu-electroplated Mg alloy (AZ61)
by: Yu Hu Yeh, et al.
Published: (2017)

Study of the fatigue behavior of Cu- and Ni/Cu- coated Mg alloy (AZ61)
by: Chi Yang You, et al.
Published: (2015)

Study of the fatigue behavior of Ni-B/Cu- coated Mg alloy(AZ61)
by: Shu Yi Chen, et al.
Published: (2019)

The Electrochemical Study on Anodic Treatment of Mg Alloy (AZ 61)
by: Yu-Han Pan, et al.
Published: (2002)

The mechanical properties of tensile and compression for 7005 aluminium alloy and AZ61A magnesium alloy
by: Guang-Cheng Kuo, et al.
Published: (2001)

Hot deformation behavior and flow stress modeling of annealed AZ61 Mg alloys
by: Chinghao Liao, et al.
Published: (2014-06-01)

Hot deformation behavior and dynamic recrystallization kinetics of AZ61 and AZ61 + Sr magnesium alloys
by: S. Aliakbari Sani, et al.
Published: (2016-06-01)

Hot deformation characteristics and constitutive analysis of extruded AZ61 Mg alloy
by: Cheng-tao Wu, et al.
Published: (2014)

Processing Map behavior of AZ61 magnesium alloy
by: Yang,CHIEH-CHEN, et al.
Published: (2011)

Superplastic Tensile Deformation Behavior and Microstructural Evolution of Al–Zn–Mg–Cu Alloy
by: Guangyu Li, et al.
Published: (2019-08-01)

Transient Liquid Phase Bonding of Magnesium Alloy AZ31 Using Cu Coatings and Cu Coatings with Sn Interlayers
by: Abdulaziz Nasser AlHazaa, et al.
Published: (2018-01-01)

Corrosion behavior of wrought magnesium alloys AZ31 and AZ61 in Hank’s solution
by: Tkacz J., et al.
Published: (2016-12-01)

Conversion Coatings Produced on AZ61 Magnesium Alloy by Low-Voltage Process
by: Nowak M., et al.
Published: (2016-03-01)

Effect of Strain Rate on the Tensile Properties and DRX of Friction Stir Processed AZ61 Mg Alloy at Elevated Temperature from 200℃ to 250℃
by: Yuan-tsung Tsai, et al.
Published: (2008)

Study of the Microstructure, Tensile Properties and Hardness of AZ61 Magnesium Alloy Subjected to Severe Plastic Deformation
by: Ondřej Hilšer, et al.
Published: (2018-09-01)

Microstructure and Tensile Properties of AZ61 Alloy Sheets Processed by High-Ratio Extrusion with Subsequent Direct Aging Treatment
by: Cheng-Cheng Zhang, et al.
Published: (2018-05-01)

Mechanism of interaction between the Cu/Cr interface and its chemical mixing on tensile strength and electrical conductivity of a Cu-Cr-Zr alloy
by: Xiaohong Chen, et al.
Published: (2019-10-01)

Effect of alcohol additives on properties of micro-arc coatings on AZ61 magnesium alloy
by: Po-Hsun Tseng, et al.
Published: (2015)

Improvement of corrosion resistance of AZ61 magnesium alloy / Zvýšení korozní odolnosti hořčíkové slitiny AZ61
by: Tkacz J., et al.
Published: (2012-12-01)

Effects of Cu, Mg contents and heat treatment on tensile, thermal stability and wear properties of Al-14.5Si-Cu-Mg alloys
by: Chih-Ting Wu, et al.
Published: (2011)

Temperature Effects on the Tensile Properties of Precipitation-Hardened Al-Mg-Cu-Si Alloys
by: J.B. Ferguson, et al.
Published: (2016-02-01)

High temperature tensile properties, fracture behaviors and nanoscale precipitate variation of an Al–Zn–Mg–Cu alloy
by: Pan Dai, et al.
Published: (2020-02-01)

The Influence of Laser Surface Remelting on the Tribological Behavior of the ECAP-Processed AZ61 Mg Alloy and AZ61–Al<sub>2</sub>O<sub>3</sub> Metal Matrix Composite
by: Beáta Ballóková, et al.
Published: (2020-06-01)

Influence of Friction Stir Process on Microstructure and Tensile Properties of Extruded AZ31 Mg Alloy
by: Hsin-WeiLee, et al.
Published: (2012)

Effects of γ-Mg17Al12 and Texture on the Tensile Properties of Friction Stir Processed AZ91 Magnesium Alloy
by: Chien-HanWu, et al.
Published: (2010)

Milling Machiniability of AZ61A Magnesium Alloy
by: WU,JYUN-SING, et al.
Published: (2016)

Hot Extrusion of AZ61 Magnesium Alloy Tube
by: Ta-fan Hung, et al.
Published: (2006)

The Thermo-Mechanical Treatments and Surface Coatings of AZ80N and LZ101 Mg Alloys
by: Po-Cheng Wang, et al.
Published: (2011)

Improvement of bio-compatible AZ61 magnesium alloy corrosion resistance by fluoride conversion coating
by: Drábiková J., et al.
Published: (2016-12-01)

PRODUCTION OF QUALITATIVE SLUGS OF Cu-Mg AND Cu-Mg-Sn-ALLOYS
by: E. B. Ten, et al.
Published: (2009-08-01)

The effects of Cr addition on microstructure, hardness and tensile properties of as-cast Al–3.8wt.%Cu–(Cr) alloys
by: Thiago M. Ribeiro, et al.
Published: (2020-05-01)

Influence of the Composition of the Hank’s Balanced Salt Solution on the Corrosion Behavior of AZ31 and AZ61 Magnesium Alloys
by: Jakub Tkacz, et al.
Published: (2017-11-01)

Effect of Electromigration on the Tensile Deformation and Microstructure of High Strength Al-Zn-Mg-Cu Alloy
by: Sen-Wu Wang, et al.
Published: (2006)

Effects of alloying elements on room and high temperature tensile properties of Al-Si-Cu-Mg base alloys
by: Alyaldin, Loay
Published: (2017)

Effect of Vapor Pressure During the Steam Coating Treatment on Structure and Corrosion Resistance of the Mg(OH)2/Mg-Al LDH Composite Film Formed on Mg Alloy AZ61
by: Kae Nakamura, et al.
Published: (2018-09-01)

Study on the Softening Behavior of Cu–Cr–In Alloy during Annealing
by: Yunqing Zhu, et al.
Published: (2020-04-01)

Tribological behavior of heat treated CuCrZr alloy
by: Çelik Gülşah Aktaş, et al.
Published: (2018-01-01)

Hot deformation mechanism of extrusion magnesium alloy AZ61
by: Ching-Hao Liao, et al.
Published: (2011)

The study of plastic deformation in the crack surrounding in AZ61 alloy
by: Palček P., et al.
Published: (2013-01-01)