The Validation between Finite Element Analysis and Experimental Measurement For Thermal Effects of Machine Tool Platform

• Main Authors: Shih-Dao Tseng, 曾詩道
• Other Authors: De-Shin Liu
• Format: Others
• Language: zh-TW
• Published: 2015
• Online Access: http://ndltd.ncl.edu.tw/handle/85113032443165210719

碩士 === 國立中正大學 === 機械工程學系暨研究所 === 103 === This thesis established a mobile platform of machine tool FEM model to investigate thermal conduction transient analysis and con-sider the varied temperature on the surface of bearing housing induced by the frictional heat of ball bearings.Use the formulation to estimate the boundary condition in different feed rate, calculated by the bearing heat generation, forced convection on the surface of screw and thermal contact resistance. And apply the boundary conditions in the FEM model to investigate the thermal conduction analysis in the mobile platform which the variance of temperature on the surface of the bear-ing housing is induced by the bearing heat generation.Then to verify the temperature rise of bearing housing and the time requimed to reach stady state in different feed rate condition by using thermocou-ple and thermal imager to measure temperature in the mean time.Finally, using multi-objective optimization to reverse finding the thermal contact resistance optimal parameters through the experi-mental data of measurement to achieve thermocouple measurement, thermal imager taken experiment and finite element analysis tripartite verification.