Experimental and Numerical Analysis of Stainless Steel Microtube in Flaring Process

Experimental and Numerical Analysis of Stainless Steel Microtube in Flaring Process

Show other versions (1)

碩士 === 國立勤益科技大學 === 機械工程系 === 102 === This study aims to discuss the miniaturization of micro tubes with scales. Aiming at the stainless steel micro tube material SUS316L, the effects of different semi-cone angles (35º, 40º, 45º, 50º, and 55º) and various fillet radii (0.3mm, 0.4mm, 0.5mm, 0.6mm, an...

Full description

Bibliographic Details
Main Authors:	Wei-Kai Ceng, 曾緯凱
Other Authors:	Tsung-Chia Chen
Format:	Others
Language:	zh-TW
Published:	2014
Online Access:	http://ndltd.ncl.edu.tw/handle/55290569103865308748

Similar Items

Experimental and Numerical Analysis of Stainless Steel Microtube in Flaring Process
by: Tsung-Chia Chen, et al.
Published: (2014-01-01)

Grain Size Effect on Flaring Limit of SUS 304 Stainless Steel Microtube
by: Cheng-Han Tsai, et al.
Published: (2010)

Experimental and Numerical Analysis of Stainless Steel and Titanium alloy Microtube Tube-end Nosing Forming
by: Chien-Yi Chen, et al.
Published: (2017)

Experimental Study of Air Flow in Microtubes
by: Wei-De Wang, et al.
Published: (2003)

An Analysis of microtube radial compression process
by: Chia-Huan Lee, et al.
Published: (2017)

Experimental and Numerical Analysis of Gas Forced Convection through Microtubes and Micro Heat Exchangers
by: Yang, Yahui <1984>
Published: (2013)

Numerical laminar flow and heat transfer in microtubes
by: Yu-Nan Tsao, et al.
Published: (2002)

Numerical Simulation of Microtube Flows with Temperature Effect
by: Shu-Kang Chang, et al.
Published: (2004)

Numerical Simulation of Compressible Turbulent Flow in Microtubes
by: SU CHUN-HE, et al.
Published: (2002)

The preparation and research of carbon microtube and titanium dioxide microtube
by: Jou-Yin Liu, et al.
Published: (2000)

Feasibility Study on Thin Stainless Steel Sheet for Micro-channel under Flexible Forming Process
by: Jian-Kai Zeng, et al.
Published: (2011)

Effects of tuberization conditions on the microtuber yield and on the proportion of microtuber tissues
by: J. Dobránszky, et al.
Published: (2004-11-01)

The Feasibility Study of Stainless Steel Powder Made from Stainless Steel Scrap Metal
by: Kai-Ting Chuang, et al.
Published: (2011)

Experimental and Numerical Assessment of the Hot Sheet Formability of Martensitic Stainless Steels
by: Peter Birnbaum, et al.
Published: (2020-12-01)

A Study on Optimal Parameter Selection for the Stainless Steel Wire Drawing Process
by: Kai-Lang Wei, et al.
Published: (2009)

Numerical analysis of stainless steel welding with pulsed laser
by: Hsin-Han Hsieh, et al.
Published: (2008)

An experimental investigation of heat transfer to hydrogen peroxide in microtubes
by: Bernier, Mathieu, 1979-
Published: (2005)

The Study of High Thickness Reduction Rate Forging Process for Stainless Steel Sheet and In-die Annealing Process
by: HUANG,KAI-WEI, et al.
Published: (2017)

Evaluation of Cracks on the Welding of Austenitic Stainless Steel Using Experimental and Numerical Techniques
by: Azouaou Berkache, et al.
Published: (2021-03-01)

Experimental and numerical investigation of formability for austenitic stainless steel 316 at elevated temperatures
by: Syed Mujahed Hussaini, et al.
Published: (2014-01-01)

A Pressing Process Analysis of Variable Diameter Stainless Steel Elbow
by: Fu-Kia Chuang, et al.
Published: (2010)

Numerical Analysis of Laser Engraving on the Stainless Steel SUS304
by: Chou Fang-Ming, et al.
Published: (2008)

The optimum drawing process of SUS304 stainless steel using Design of Experiment.
by: Kai-Cheng Chang, et al.
Published: (2004)

Numerical and experimental study of methane and propane flames in relation to gas flaring
by: Aboje, Alechenu Audu
Published: (2015)

Effect Analysis of Geometric Parameters on Stainless Steel Stamping Multistage Pump by Experimental Test and Numerical Calculation
by: Chuan Wang, et al.
Published: (2013-01-01)

The weldability of experimental duplex stainless steels
by: Bulbulia, Zaid
Published: (2017)

The stress corrosion behavior of 321stainless steel in the
by: Haw-Kai Chan, et al.
Published: (1996)

Potato microtubers : their formation and dormancy
by: Nasiruddin, Khondoker Md
Published: (1995)

The production and utilization of potato microtubers
by: Leclerc, Yves
Published: (1993)

In vitro potato microtuber production
by: Nikopoulos, Dimitrios P.
Published: (1993)

Containerless processing of stainless steel
by: Bui, Quoc Cuong, 1974-
Published: (2005)

Experimental Analysis by Measurement of Surface Roughness Variations in Turning Process of Duplex Stainless Steel
by: Krolczyk Grzegorz M., et al.
Published: (2014-12-01)

Numerical modeling and optimization of machining duplex stainless steels
by: Rastee D. Koyee, et al.
Published: (2015-01-01)

The Numerical and Experimental Analysis of Ballizing Process of Steel Tubes
by: Dyl T.
Published: (2017-06-01)

Experimental and Numerical Investigation of Ratcheting Effects in 316L Stainless Steel - The Two-Rod approach.
by: Eklund, Gustav
Published: (2014)

Experimental and Numerical Evaluation on Deformation and Fracture Mechanism of Cast Duplex Stainless Steel Tubular Specimen
by: Zhenhua Li, et al.
Published: (2020-08-01)

Numerical and Experimental Evaluation of Pitting Corrosion of CUSTOM 450 Stainless Steel Alloy in Chloride Environment
by: Y. Mollapour, et al.
Published: (2021-09-01)

Numerical Simulation and Experimental Investigation on 2205 Duplex Stainless Steel K-TIG Welded Joint
by: Shuwan Cui, et al.
Published: (2021-08-01)

The Analysis on Flaring Process of Metal Tubes
by: Jyh-Wha Chen, et al.
Published: (2001)

An Analysis of Copper Pipe Flaring Process
by: Jun-Xian Li, et al.
Published: (2010)