Design and Implement of Dipole Antenna for GSM Application

碩士 === 明新科技大學 === 電機工程研究所 === 102 === In this thesis, we study and fabricate three kinds of the dipole antenna which are rectangular planar dipole antenna, rectangular planar dipole antenna with meander line, and tubular dipole antenna. We developed the rectangular planar dipole antenna which can be...

Full description

Bibliographic Details
Main Authors: CHIEN, YU-CHUNG, 錢昱中
Other Authors: 盧裕溢
Format: Others
Language:zh-TW
Published: 2013
Online Access:http://ndltd.ncl.edu.tw/handle/69035964271208757619
id ndltd-TW-102MHIT0999002
record_format oai_dc
spelling ndltd-TW-102MHIT09990022016-02-21T04:20:15Z http://ndltd.ncl.edu.tw/handle/69035964271208757619 Design and Implement of Dipole Antenna for GSM Application GSM頻段之偶極天線設計 CHIEN, YU-CHUNG 錢昱中 碩士 明新科技大學 電機工程研究所 102 In this thesis, we study and fabricate three kinds of the dipole antenna which are rectangular planar dipole antenna, rectangular planar dipole antenna with meander line, and tubular dipole antenna. We developed the rectangular planar dipole antenna which can be applied to 1800 MHz and 2400 MHz by adjusting the antenna width W and middle gap of the dipole antenna. When the ratio length/width of antenna equals 2 and the middle gap of the dipole antenna equals 1.5 mm, higher bandwidth of designed antenna can be obtained. The RO4003C substrate is also used in this study to enhance the bandwidth and reduce the return loss of rectangular planar dipole antenna. The rectangular planar dipole antenna with meander line is also designed. The available frequency ranges include 793.80~1001.98MHz which can be applied to GSM900 system, 1567.30~2162.20MHz which can be applied to GSM1800 system, and 2207.58~2553.85MHz which can be applied to RFID and Bluetooth system. The tubular dipole antenna is also implemented. This wideband tubular dipole antenna can be used in GSM and GPS frequency bands. Changing the tubular dipole antenna parameters of length, outside diameter, inside diameter and tubular materials are studied to observe the variations of bandwidth and gain of the tubular dipole antenna. Six different industrial plastics such as PMMA, PE, POM, PVC, ABS, and Bakelite are used to change the tubular material. It can be observed that the smaller dielectric constant of tubular material will increase the impedance bandwidth of the tubular dipole antenna. The fabricated PVC tubular dipole antenna with length L = 60 mm and outside diameter of tubular material 18 mm can obtain the wide bandwidth about 1117 MHz. The return loss and peak gain of the fabricated tubular dipole antenna are -16.89dB and 5.19dBi at 900MHz, -36.14dB and 4.13dBi at 1575MHz, -11.74dB and 4.43dBi at 1800MHz . This antenna can be used in GSM and GPS communication systems. 盧裕溢 2013 學位論文 ; thesis 94 zh-TW
collection NDLTD
language zh-TW
format Others
sources NDLTD
description 碩士 === 明新科技大學 === 電機工程研究所 === 102 === In this thesis, we study and fabricate three kinds of the dipole antenna which are rectangular planar dipole antenna, rectangular planar dipole antenna with meander line, and tubular dipole antenna. We developed the rectangular planar dipole antenna which can be applied to 1800 MHz and 2400 MHz by adjusting the antenna width W and middle gap of the dipole antenna. When the ratio length/width of antenna equals 2 and the middle gap of the dipole antenna equals 1.5 mm, higher bandwidth of designed antenna can be obtained. The RO4003C substrate is also used in this study to enhance the bandwidth and reduce the return loss of rectangular planar dipole antenna. The rectangular planar dipole antenna with meander line is also designed. The available frequency ranges include 793.80~1001.98MHz which can be applied to GSM900 system, 1567.30~2162.20MHz which can be applied to GSM1800 system, and 2207.58~2553.85MHz which can be applied to RFID and Bluetooth system. The tubular dipole antenna is also implemented. This wideband tubular dipole antenna can be used in GSM and GPS frequency bands. Changing the tubular dipole antenna parameters of length, outside diameter, inside diameter and tubular materials are studied to observe the variations of bandwidth and gain of the tubular dipole antenna. Six different industrial plastics such as PMMA, PE, POM, PVC, ABS, and Bakelite are used to change the tubular material. It can be observed that the smaller dielectric constant of tubular material will increase the impedance bandwidth of the tubular dipole antenna. The fabricated PVC tubular dipole antenna with length L = 60 mm and outside diameter of tubular material 18 mm can obtain the wide bandwidth about 1117 MHz. The return loss and peak gain of the fabricated tubular dipole antenna are -16.89dB and 5.19dBi at 900MHz, -36.14dB and 4.13dBi at 1575MHz, -11.74dB and 4.43dBi at 1800MHz . This antenna can be used in GSM and GPS communication systems.
author2 盧裕溢
author_facet 盧裕溢
CHIEN, YU-CHUNG
錢昱中
author CHIEN, YU-CHUNG
錢昱中
spellingShingle CHIEN, YU-CHUNG
錢昱中
Design and Implement of Dipole Antenna for GSM Application
author_sort CHIEN, YU-CHUNG
title Design and Implement of Dipole Antenna for GSM Application
title_short Design and Implement of Dipole Antenna for GSM Application
title_full Design and Implement of Dipole Antenna for GSM Application
title_fullStr Design and Implement of Dipole Antenna for GSM Application
title_full_unstemmed Design and Implement of Dipole Antenna for GSM Application
title_sort design and implement of dipole antenna for gsm application
publishDate 2013
url http://ndltd.ncl.edu.tw/handle/69035964271208757619
work_keys_str_mv AT chienyuchung designandimplementofdipoleantennaforgsmapplication
AT qiányùzhōng designandimplementofdipoleantennaforgsmapplication
AT chienyuchung gsmpínduànzhīǒujítiānxiànshèjì
AT qiányùzhōng gsmpínduànzhīǒujítiānxiànshèjì
_version_ 1718193087752175616